An analysis of the problem of increasing the efficiency of the functioning of the logging trucks for hauling timber to the lower timber depots and consumers. Proposed technical solutions for of raising cross-trains in complex natural and industrial environments.

Keywords: Active semi-trailer used forestry, passableness, prosary operation.

The temperature dependencies of the main parameters of p-channel MOSFET model in a temperature range 20 ... 300 K are measured. The universal formal four-parametric model, which allows approximating all experimental temperature dependencies with the relative error less than 1 % is proposed. The model is intended for the MOSFETs which are applying in low-noise amplifiers of the radio-receiving devices of an optical and infrared range on astronomical satellites, radio telescopes and space observatories. The presented results can be used to simulate the temperature modes of MOSFET amplifiers in SPICE-type electronic simulators. The solution of this problem will predict uptime device when the temperature changes in the cases of emergency or extraordinary situations and also will allow optimizing the choice of refrigerant and increasing the reliability of the amplifier in the conditions of cryogenic temperatures.

Keywords: MOSFET, MOSFET parameters, cryogenic temperature, parameters measurement, temperature dependencies

A mathematical model of a surface mini-ship "Neptune", including a mathematical model of the actuators. Used to identify the parameters of the mathematical model. analysis of stability and controllability of surface mini-vehicle for its mathematical model.

Keywords: mathematical model, surface mini-ship, handling, stability

The method of digital parametric measurement of the phase shift of signals with slowly varying amplitudes of the same slowly varying instantaneous frequencies was proposed. The numerical simulations and experiments on the developed hardware and software system were carried out. The error of measurement the phase difference of harmonic signals in the experiments were not more than  0,00001 radian. The method can be used in applications where the measured value is expressed in terms of the phase difference of quasi-harmonic signals.

Keywords: quasi-harmonic signal, phase shift, real time measurements, hardware and software system

To investigate the stability of the porous bearings developed computational model heterogeneous porous bearing of finite length. Given the permeability anisotropy of the porous layer in the paper the problem of stability of motion of a pin in the bearing for the two different versions of lubrication: the axial direction and in the direction perpendicular to the axis of the bearing. Obtained and analyzed the tasks identified areas of stability of motion spine.

Keywords: porous bearing, friction regime, the permeability of the porous layer, the viscoelastic lubricant.

In this paper a systematic study of individual single-walled and multi-walled carbon nanotubes was performed by Raman spectroscopy and high-resolution electron microscopy. We have presented the geometrical and electronic structure analysis on the examples of two tubes: individual single-walled and double-walled nanotubes. The role of different environmental effects and their influence on the final structure assignment are discussed. Moreover, we have shown that the Raman spectroscopy gives reliable estimations of the nanotube diameters and the conductivity. Given a non-destructible character of Raman spectroscopy, we may conclude that it is one of the most efficient methods for structure analysis of carbon nanotubes.

Keywords: Carbon nanotubes, Raman spectroscopy, electron microscopy

Proposed by parallel implementation structures aloritmicheskih simulating year-round circulation of water bodies. The research evaluation of computation time, find the optimal algorithm for the implementation of independent calculations for multi-core processors to reduce the computation time.

Keywords: parallelization of computations, thermohydrodynamics modeling of water objects, multi-core processors

In modern conditions, of particular importance is the need to form a model of the reproductive system of the regional economy, adequate objectively existing level of technological development, trends involvement in every phase of the reproductive process of innovative products, intellectualization of human activity, as well as the new requirements of economic globalization of world economic relations. In this regard, there is a need for a management model reproductive potential, focused on the balanced development of all the subsystems of the regional economy, taking into account the factors of integration and globalization of the world economy.

Keywords: balance, reproductive potential, production function, the economy of the region

In the paper we consider the energy efficiency of electric trains in overcoming the curved portion of the profile path. In this paper, were synthesized motion control algorithms that will help conserve energy resources by means of changes in traffic patterns electric depending on the profile path. The simulation electrorolling stock motion by offer the model showed a reduction in energy consumption compared to the nominal operation.

Keywords: energy efficiency, electric train, traffic management, motion control algorithms, reducing the consumption of energy resources

The represented approach of dynamic process modeling is based on the technology of automatical semantic text analysis. An associative network is forming during text processing. Its key notions, including  lexical and psycholinguistic markers of the analyzed process, are ranked by theirs semantic weight. The weight being multiplied by marker status value at the scale of “good-bad” gives its contribution to the process stage characteristic. Transformation of the accumulated for all of the markers process characteristic from one period of time to another one is characterize a direction of the process.

Keywords: automatical text processing, associative (homogenous semantic) network, process dynamic modeling, social processes, lexical and psycholinguistic markers

The article discusses a method for optimizing the synthesis of digital state machines for solving tasks of search patterns with masks on FPGA using automatic models. Standard methods for the synthesis of the FPGA don't optimize digital state machines, but only optimize the placement of logic elements on the chip. The method of vectoring states involve the decomposition the structure of the machine and the combining the variety of states to the vertex-array of states. The states in the vertex-array is controlled by special state machine. This simplifies the addressing to the heights of states of the graph , and optimizes logical structure of machine. The number of states of the digital machine remains unchanged. Vectorization of states is simplifying the synthesis and control of state machine and reduces the number of logical elements.

Keywords: digital state machine, graph of digital state machine, synthesis of digital state machine, FPGA, reconfigurable computing system, pattern search, vectoring states of digital state machine.

The urgency and feasibility of application of biosensors with active biological layer for environmental studies was justified. A study of biosensors of various configurations to build a test system of environmental pollution control and determine the degree of aquatic toxicity was conducted. A simulation model of biosensor system was built. The selectivity of the biosensor was determined by theoretical experiments in which the analytical signal of the biosensor for biologically active layer without other biologically active substances was determined. The relationship between the type of transducer and biologically active substance was revealed. The software implementation of bisensor system was developed that reveals a number of pollutants and allows using not only different converters, but also different strains.

Keywords: biosensor, strain, quartz crystal, simulation model, environmental studies, pollutants, toxicity, sensitivity

This article is devoted to reviewing of crusted composition, based on natural minerals: magnesium chloride (bischofite) and glauconite, as a method of providing an ecological and technical security at traffic areas. In one of the main parametres of road safety - the coefficient of coupling revealed the advantages of using of eco composition over other commonly used anti-icing agents.

Keywords: crusted eco composition, icemelter, coefficient of adhesion, accident rate, ecological security, technical security

Одним из важнейших факторов, исключающих возникновение дефектов типа пор, расслоений, участков с неполной полимеризацией связующего в формуемой высоконагруженной полимерной композитной конструкции, является управляемость процесса во всем объеме композита. Для обеспечения однородности процесса полимеризации связующего предложен метод многокритериальной оптимизации процесса на основе математической модели, связывающей процессы распространения тепла и кинетики полимеризации. Система связанных уравнений процесса, учитывающая экзотермическое тепло, выделяемое при полимеризации термореактивного связующего, изменение теплоемкости и теплопроводности композита при фазовых переходах от жидкого к гелеобразному и, далее, к твердому состоянию, точную геометрию технологической системы, включая прессформу, а также интенсивность тепловыделения независимо управляемых нагревателей, реализована в виде конечноэлементной модели. Предложенный метод синтеза закона оптимального управления нагревателями, использующий метод множеств Парето, проиллюстрирован на примере полимеризации разностенной композитной конструкции, формуемой из стеклопластика.

Keywords: Композиционные материалы; Процесс полимеризации; Оптимальное управление; Кинетические уравнения; Уравнения в частных производных в задачах управления и оптимизации, Конечно-элементное моделирование, Фронт Парето

This article considers the causes of halitosis and methods of the diagnosis. Halitosis, syndrome of bad breath caused by pathological condition of the oral cavity or internal organs and systems, has a significant impact on the patient's social life. Analysis of the composition of exhaled air may become a promising way to diagnose halitosis, as the direct relationship between the compositions of molecules of oxygen, carbon dioxide, nitrogen oxides, ammonia etc. and the causes of halitosis were found. The article's authors review and analysis the methods of measurement of qualitative and quantitative composition of exhaled air. The most common methods include the use of electrochemical, optical sensors, infrared spectrometers and mass spectrometers. The latter method is positioned as the most optimal method of analysis of exhaled air due to its high accuracy, selectivity and sensitivity. The authors' portable mass spectrometer being developed is represented. At this stage it can detect traces of oxygen and carbon dioxide, which inject into the device through the capillary system or membrane one, in gas samples in real-time mode.

Keywords: diagnosis of halitosis, molecular biomarkers, analysis of exhaled air, portable mass spectrometer