×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

Modeling of diffusion saturation of austenite with carbon, taking into account the temperature in the cementation process

Abstract

Modeling of diffusion saturation of austenite with carbon, taking into account the temperature in the cementation process

Venediktov A.N., Koreshkova E.V., Kulemina A.A.

Incoming article date: 24.09.2019

Cementation studies focus almost exclusively on the movement of carbon, described through the diffusion equations, often with constant coefficients and without regard to temperature. This approach does not allow, to take into account the further diffusion of carbon into the workpiece in a lower temperature range at the stage preceding quenching. The paper describes the modeling of the diffusion saturation of steel by carbon in the cementation process, taking into account the influence of temperature on the example of a numerical solution of the gear cementation problem using the COMSOL Multiphysics program. It was shown that the finite element mathematical calculation of the process of saturation of austenite with carbon during cementation gives good agreement with experimental data, and finite element analysis methods can be used for multivariate calculation of the carbon content in austenite after diffusion saturation

Keywords: carbon diffusion, carburization, COMSOL Multiphysics, numerical modeling, carbon distribution, carburization, Fick diffusion law, mass transfer, heat transfer, gear, finite element method