Calculation of the peak wind load at the edges of rectangular buildings
Abstract
Calculation of the peak wind load at the edges of rectangular buildings
Incoming article date: 17.10.2025The calculation of wind loads on curtain facades and their fastening elements for high-rise buildings and structures using engineering methods and various numerical techniques remains an important task to this day. The corner sections of the building, where the greatest negative wind pressure occurs, are of particular interest. Incorrect calculation of wind suction can lead to the separation of panels during strong winds. The article calculates the peak wind load using a numerical method for a rectangular building with an aspect ratio of 0.6. Numerical calculations of the two-dimensional flow around the building profile in the ANSYS Fluent program using the k-e Realizable turbulence model were used to obtain the coefficients of drag, lateral force, and the distribution of the pressure coefficient at maximum lateral force. The calculations showed that the wind suction at the edge of the building exceeds the standard value by approximately 30%. The results obtained in the article should be taken into account when designing the facade.
Keywords: peak wind load, wind suction, rectangular buildings, peak negative aerodynamic pressure coefficient