A design of the actuator, consisting of a thin layers of silicon dioxide and aluminum is proposed. There are calculations made of the response speed and heat dissipation of the actuator. By making the best selection of layer thicknesses and optimization stages of technological process, in particular the deep selective etching of silicon, the best performance on the angle of inclination of the actuator and the speed of the device could be achived. The greater the difference between the initial temperature and the heating temperature, the stronger the beam of the actuator is lowered to the plane of the silicon plate, and, therefore, less angle of elevation above the surface of the silicon plate. It is thus possible to control the angle of the beam by selecting the appropriate heater and voltage, providing the desired temperature. The design of the micromirror device based on the proposed actuator is provided. The developed design is based on the actuator and allows for controling the tilt of the mirror in a wide range.

Keywords: silicon, termoactuator, micromechanical systems, bimorph structure, micromirrors

The article is devoted to the modeling of plant material and to increase the strength properties of building structures using bionic principles. The different kinds of structures reinforcing fabric leafy plants. Recommendations on the use of reinforcement cages during restoration work in construction.

Keywords: shell strength, plant, reinforcing fabric, building construction

There is the information of the use of belt electrostatic grain cleaner for the pre-sowing seed treatment with the purpose of their disinfection in this artcicle. The results of the treatment of seed mixture in electric field at the different variants of work conditions are presented. The specific expenditure of electric power on the percent of seed mixture disinfection was calculated.

Keywords: electric method, pre-sowing treatment, disinfection, electric field, belt electrostatic grain cleaner

    In this paper we evaluate the viability of cell suspensions with the assessment of their bioelectric properties. A method for evaluation of cell suspensions, based on the method of pulse impedance. The frequency response of the electric impedance of suspensions chondroblasts, determined by analysis of the transition function. Under the transition function is meant to test the reaction of the object exposure, for which current is used as a reaction - voltage electrodes placed in the sample suspension. After the time-frequency transform data to a PC, the transfer function is considered in the space of states that characterize the electrical properties of multicomponent biological tissues, which allows us to go to the electrical equivalents of its constituents. The measurement process, i.e. impact on the sample cell suspension is carried out within the pulse of electric current, which allows a quick assessment of the cell suspension.

Keywords: cell suspensions, electrical impedance, transfer function, state space, the functional identification

This paper addresses the testing results of steel rods with grade A500 and A600, which used as a conventional reinforcement. It was investigated the strength properties of carbon and fiberglass sheets with different number of material layers. The results are compared with the data given in the quality certificates.

Keywords: fiberglass, carbon frp sheets, laminates, sheets of carbon and fiberglass, the ultimate load ,strength

The paper reports on dynamical model of optimal biological resource exploitation with corruption. Particularly, it is allowed a fish quota increase after paid a bribe. The research has been realized with the sustainable development conception by the Pontryagin's maximum principle. A time moment, where the bribe is profitable, is considered. Fight corruption methods are presented.

Keywords: Mathematical model, optimal exploitation, corruption

The questions related to the study of various varying factors on the strength of normal sections in beams. Here's a program of research by one methodology designed to study the effect of the type and content of steel reinforcement and externally composite on the strength of normal sections that have not previously been investigated.

Keywords: Concrete, reinforced concrete, the percentage of reinforcement, carbon frp sheets, fiberglass, laminates

Structure and features of biosignals digital processing in measuring convertor of auditory evoked potentials of bioelectrical brain activity are considered at this article. Measuring convertor of auditory evoked potentials of bioelectrical brain activity is the main part of neurological diagnostics systems allowed to obtain information about the current state of the human nervous system. This paper describes the processing method of evoked potentials based on recording and processing a continuous electroencephalographic (EEG) signal. The proposed method consists of three main steps: registration of the EEG signal, segmentation of the EEG signal and the averaging of segmented fragments of the EEG signal.

Keywords: measuring convertor of biosignal, evoked potential of bioelectrical brain activity, biosignal averaging

Method of successive approximations was used to solve the problem of optimization of multispan continuous beam. Cross section of a beam was a welded I-beam.  By the variation of the width of the shelf we ensured that the maximum equivalent stress for energy theory of strength in each section is the same throughout. The solution is made numerically using complex MatLab. Bearing capacity of beams with variable stiffness along the length increased in 2 times in comparison with the beam with constant stiffness and the same mass. The proposed method can be applied to frames, taking into account the contribution of longitudinal forces in the equal stresses. Another effective way to change stiffness is to change the height of the wall of I-beam. In practice curvilinear shape of beams or shelves are not used because of complexity of manufacturing. They are replaced by the discrete form of cross section.

Keywords: multispan beams, work method, optimization, uniform strength, welded I-beam, variable stiffness

An analysis for the influence, of type and quantity of steel and composite reinforcement, on the normal cracks development, at different load levels, and by the maximum allowable deflection in beams. It was Found that throughout the load range, the reference beams are most cracked. The reduction degree in crack width depends on the strength and percentage of the steel reinforcement.

Keywords: concrete, reinforced concrete, steel, fiberglass, carbon fiber, laminate, maximum allowable crack width, load level, the development of cracks, the relative width

  Method of an automatic recognition of sleep events is described. The method is based on analysis of amplitude histograms that are built on each of registered channels. The method is designed for sleep events, distinctive feature of which is expressed amplitude change that appears simultaneously on several channels. For example, "General body movement" and "Limbs movement" events. But this is not limited; method can be applied to other events, for example "Snore". Algorithm can be divided into three stages: histograms building and analysis, vertical analysis, results processing.

Keywords: PSG, sleep events, histogram, detection algorithm

The  researches results of possibility of  equations simplification of ring dynamic, which is based on two bearings with the help of task of special base functions system, in accordance with conditions of  zero transmissions in bearings points are represented. The calculation of the coefficients of the basis functions of a linear function and the polynomial of degree  two and three.

Keywords: ring based on two bearings, zero displacement at points bearings, system of basis functions

  The analysis of a spherically converging sound beam is made. As the parameter reflecting evolution of a wave, the front surface curvature is used. The expressions are received, allowing determining value of a phase front curvature of sound beams with various amplitude distributions. Axial and cross distributions of front curvature of focused beam with gauss and uniform amplitude distributions are resulted. Different influence of radiator surface curvature on wave front dynamics in cases ,  and  is marked. Similar characteristics for a flat radiator are presented. 

Keywords: Focusing radiator; diffraction; phase front curvature

This article addresses options for building advanced of resistive voltage dividers (attenuator), providing a reduction in a given number of once input voltage in a wide range of operating frequencies. To correct the frequency error in the AT parasitic capacitance the load is proposed modified scheme with the special frequency attenuator correction, which allows for one to two orders extend the range of working frequencies the AT and increase performance.
Results of computer modeling.

Keywords: attenuator, a resistive voltage divider, the parasitic capacitance load correction capacitor, speed, large-amplitude pulse signal, the compensation effect, the upper frequency limit, broadband, analog-to-digital interfaces

Development of urban areas, especially Rostov-on-Don, which is one the largest city of the south of Russia, should be based on a comprehensive assessment and analysis of the structure of housing stock and engineering services, which provide all types of resources for the city. Research of the structure of housing stock, analysis of residential and private housings, municipal and business buildings, information on the territorial distribution of these objects with reference to the topography would allow to create a reliable information base for the development of district heating schemes. Housing stock of Rostov-on-Don was ranked by the year of construction, number of floors and material of the wall. The article assesses the providing of municipal and business buildings, kindergartens, schools, institutions consumer services, culture and sport institutions.

Keywords: urban development, energy, heating, year of construction, material of walls, floors