Bottom sediments (UP to) are media in which both longitudinal and shear acoustic vibrations can be present. The presence of several velocity components in bottom sediments makes it possible to excite various types of waves, both longitudinal and shear. In this paper, methods of excitation, generation and reception of difference frequency shear waves (RF) created by parametric systems in (DO) in location modes are analyzed. The analysis of their work in the DO is presented, and their comparative characteristics are given in comparison with the excitation, formation and propagation of the field of longitudinal RFCs in the DO. Prerequisites are given for the creation of a parametric profiler working using the method of excitation, generation and location of shear waves in a complex multiphase medium ""water-DO"". A block diagram is presented and the principle of operation of a parametric profiler on shear waves is described. The advantages and disadvantages of this method of location are shown. The conclusion is made about the possibility of creating and ration.

Keywords: parametric antenna, bottom sediments, shear waves, difference frequency waves, parametric profilogaf

The article proposes new compositions of a fast-hardening concrete mixture using Portland cement, fine and coarse aggregates, basalt fiber, a complex modifying additive including acetone-formaldehyde resins and magnesium chloride (bischofite). The results of scientific and experimental studies are presented and the influence of the proposed additives on the formation of the structure, rheological and physico-mechanical properties of fast-hardening concrete is determined. Analysis of the test results showed that the proposed formulations, including a complex additive and basalt fiber, contributed to a decrease in the water-cement ratio, increased mobility of the mixture and increased strength of hardened concrete in the early and final hardening periods.

Keywords: concretes, oil and gas storage, modifying additives, fiber, mobility, setting time, strength

This article discusses the advantages and perspective for the use of biogas in the conditions of the Republic of Crimea. The ecological and economic aspects of the use of biogas technologies at winemaking enterprises are touched upon. Describes the methods of using biogas at the winery "Massandra" in the Republic of Crimea. The calculation of the use of natural gas in the boiler house of a winery is made. A calculation was made for the use of biogas in a boiler house. It can be concluded that when using biogas in the boiler house of a winery, fuel needs are fully covered. The surplus of the remaining fuel is proposed to be used in a cogeneration plant to generate electricity.

Keywords: biogas, cogeneration plant, grape plant residue, recycling, interchangeability, granulate, natural gas, grapes, thermal energy, electricity, winery

This article presents one of the methods for analyzing the chirality coefficient of a medium depending on such parameters as concentration n, frequency f, dielectric constants of both the container material, the medium itself, and left- and right-handed spirals distributed in this material. As a result of this work, the frequency characteristics of the chirality coefficient were obtained at various concentrations of the container trace elements.

Keywords: chiral medium, Telledzhene element, chirality coefficient, dielectric constant of the medium, magnetic permeability of the medium, spiral structure, metamaterial substrate, bulk concentration, metamaterial, spiral inclusions

When developing the final qualifying paper the problem of choosing the optimal structural concept for bearing and enclosing structures. To solve it, normative technical and economic indicators, variant comparison (trial design) and other methods can be used. The objective of the present study, which is carried out as part of the final qualifying paper, is to search for and develop an algorithm that is understandable for practical use for choosing an effective (in terms of specific consumption) structural concept for a steel truss.

Keywords: optimization, specific consumption, cost value, steel truss, steel structure design, STARK ES, analysis of trusses, optimal structural concept, changing the section type, selection of an effective structural concept

This article is devoted to the study of concentrations of carbon monoxide (II), phenol, formaldehyde, aliphatic hydrocarbons in the premises of buildings, including the assessment of the regularities of their vertical distribution in the height of buildings at different times of the day from vehicles. Research is necessary to develop a program for electronic computers, which is necessary for the design of construction projects.

Keywords: помещения, оксид углерода (II), фенол, формальдегид, углеводороды алифатические, здания, время суток

An analysis of the accident rate on gas pipelines is given. Mathematical dependences of the volume of gas entering the atmosphere during the degassing of a gas pipeline section are given. Based on the existing nomogram for determining the gas compressibility factor for main gas pipelines, a nomogram for natural gas transported through gas distribution networks was constructed.

Keywords: gas pipelines, accident rate, degassing, gas bleeding, gas compressibility factor

The article analyzes the impact of the transition to distance learning on the academic performance of students of the Institute of Computer Science, Electronics and Robotics. The disciplines are identified, the development of which does not cause difficulties in the remote format and disciplines to which such technologies are difficult to apply. Based on the findings, recommendations are given to improve the quality of education at the Institute.

Keywords: quality, distance technologies, academic performance, control card, alternative attribute

the article analyzes the economic instruments used by states in domestic and foreign policy from the point of view of identifying the existing coercive mechanisms in modern social practices. The study revealed how states use economic instruments as the preferred means of geopolitical struggle. In addition, the work separately reflects the fact that States should preserve the right to an original socio-economic model of development. We should also not forget about the negative consequences of unilateral coercive measures. Using the method of cognitive modeling and constructing cognitive maps, the authors identify the connections in the analyzed social practices from the perspective of studying the means of geo-economic pressure.

Keywords: cyberwarfare, cyberattacks, cybersecurity risks, communication networks, transport systems, tactical, operational and strategic initiatives

The results of the automated evaluation of the dynamic quality of grinding machines in the process monitoring system are presented. The transfer function of the dynamic system is analytically obtained, a formula for the frequency function is derived from it, on the basis of which models of vibration spectra are constructed, in which frequencies are present that are adequate to the real vibro-acoustic vibrations of the dynamic system of the machine when processing rings. For experimental evaluation of the dynamic quality of machine tools, integral estimates of the low-frequency components of the vibration spectrum are used, characterizing the relationship between the quality of processing bearing rings and the dynamic quality of machine tools.

Keywords: dynamic quality of the grinding machine, vibroacoustic vibrations, bearing rings, processing quality, monitoring system

Refrigerating machines are designed to cover peak heat generation in public buildings. At the same time, peak loads are often short-term and most of the time the refrigerating machines operate at 40-60% of their maximum capacity. The article deals with the issues of uneven cold consumption on the example of a sports complex located in Volgograd. When designing the air conditioning system of the games hall, a cooling system with the use of "chiller-fan coils"is used. An effective solution to reduce costs is to include a cold storage battery in the cooling station circuit. The use of a cold storage battery allows you to reduce operating costs.

Keywords: cooling system, air conditioning system, refrigeration machine, cold storage, energy consumption, peak loads, variable energy consumption

Reducing the consumption of heat resources in construction and housing and communal services is one of the key tasks solved by design engineers. The increase in the thermal protection of buildings is determined by regulatory documents, but construction customers often require it to be strengthened without any feasibility study. The objective of the study is to develop a graphical-analytical model, the analysis of which allows you to choose the most optimal combination of heat resistances of the coating (walls) and translucent structures of a particular building object.

Keywords: energy-saving project, thermal protection of buildings, "indifference" curves, the method of the fastest descent

The article offers a solution which will enable to reduce dust pollution during earthworks in urban conditions. A special multi-functional mechanism is proposed enabling to perform several important preliminary processes simultaneously - improving an environmental situation on the site of earthworks. The ground surface damping during trench opening and soil unloading from a bucket into a disposal area will make it possible to reduce the fine dust pollution of the air surrounding a work location. The objective of the study is to develop a mechanism reducing the fine dust dispersal when performing trench and pit excavation. The novelty is that a mechanism of special construction has been proposed that can be mounted onto any machine in the construction line.

Keywords: earthworks, dispersal, technology process, trenching, single-bucket excavator, soil disposal area, trench, fine dust, air pollution, РМ 2,5, PМ 10

The issues of ensuring the reliable operation of bearing production on the basis of the organization of the process monitoring system (SMTP), based on the introduction of effective automated control and diagnostics of technological equipment, including processing modes and technical condition, active control of product quality in the manufacturing process, output characteristics of rings processed by the eddy current method, as well as making decisions on timely maintenance of equipment. The results of the inspection are stored in a report file generated in the eddy current device computer: information about each checked part is stored: the time of inspection, the type of part, the surface to be monitored, the number of the machine on which the part was processed. The results of eddy current control serve as the basis for monitoring the dynamic characteristics of the equipment by vibroacoustic vibrations. Based on the results of the control within the framework of the SMTP, a decision is made on the quality management of processing. The introduction of SMTP provided a significant reduction in ring defects in terms of grinding quality up to 2-3 % and increased operational reliability of bearings.

Keywords: grinding process monitoring, bearing rings, dynamic machine quality, active control, eddy current control, ring quality

The lack of information about the conditions for the implementation of transport processes does not allow building mathematical models that operate with extremely accurate input data. Therefore, methods are being developed that formalize input uncertainties for constructing mathematical models of transport processes. To describe uncertainties, along with static, stochastic and interval approaches, methods based on fuzzy sets are actively used. The generalization of the belonging of the element, presented by Zadeh, allowed blurring the boundaries of the set. The blurring of the boundaries of the sets allows one to formalize insufficiently complete, in an informational sense, judgments and facts for the purpose of the subsequent use of this information in the construction of mathematical models. To identify formal approaches to working with uncertainties, an analysis of foreign periodicals in recent years has been carried out and two well-known approaches have been identified. The first is based on the theory of fuzzy sets - the generalized concept of belonging of an element to a set, leading to blurring of the boundaries of the set. The second approach involves describing fuzziness using a hierarchy - a family of ordered crisp sets [1]. Within the framework of the first approach, the authors have identified five ways of formalization. The first includes fuzzy sets (numbers) with different n-gonal forms of the membership function. The second consists of intuitionistic fuzzy sets (numbers) with n-gonal membership functions. The third contains heterogeneous fuzzy sets of type 2. The fourth represents non-standard fuzzy sets (oscillating, Pythagorean, etc.). The fifth method is a combination of spaced fuzzy numbers, intuitionistic spaced fuzzy numbers, and the like. References are given to sources containing a description of formalization methods and their application in solving some fuzzy transport problems, possible directions of research on the considered topics are formulated.

Keywords: fuzzy transport routing problem, optimization, fuzzy methods, fuzzy numbers, fuzzy sets, heuristic algorithms, hybrid algorithms, transport processes