Research of the possibility of reducing resistance of the graphite coating in the solid tantalum capacitor
Abstract
Research of the possibility of reducing resistance of the graphite coating in the solid tantalum capacitor
Incoming article date: 16.05.2017In recent years, the most widely used semiconductor oxide-tantalum capacitors in high frequency circuits acquired, which causes the need to reduce resistance of the contact and the semiconductor layers. One solution to this problem and at the same time, promising way of improving solid-state tantalum capacitors is to modify process technology for applying the semiconductor layer and heat treatment resistive coating of colloidal graphite. Contact carbon layer according to conventional technology is applied by impregnating the tantalum capacitor sections in an aqueous suspension of colloidal graphite (usually imported), and then produce exposure to air and heat treatment at an elevated temperature. This article presents the results of studies of the effect of conditions of application of the contact layer of colloidal graphite on the electrical characteristics of sections of tantalum oxide-semiconductor capacitor, in particular in the equivalent series resistance, the technique of applying aquadag. Described in detail the design of solid-state tantalum capacitor, the role of the contact carbon layer and its contribution to the ESR of the capacitor.
Keywords: oxide-semiconductor capacitors, colloidal graphite, resistance of the capacitor, the cathode coating, suspension, immittance, aquadag