Measuring the sustainability of the market development of cultivated mushrooms will keep its status through isostatic effects of the complex determinants of development, creating optimal conditions for the movement of his main indicators nevelirovanie their dynamic vibration

Keywords: Market cultivated mushrooms, sustainable development, trend, trend models, the coefficients of variability.

The article is dedicated to development of a mathematical model for evaluation of production assets in smart power grids state for decision support system. The results of equipment state evaluation can be used for prognosis of reliability of the asset and each of its components functioning for the time interval, for which various versions of technical solutions are considered.  

Keywords: decision support system, state assessment, Smart Grid

The simulation of two-dimensional spherical crystals consisting of a large number of particles is carried out. These shells were analyzed based on their geometric structure and energy distribution. Various types of defects formed in a state of equilibrium  is considered. Being shown the ambiguity of the existing method of their interpretation. A new way of describing such defects in the close-packed two-dimensional crystals with different topology is suggested.  

Keywords: topological defects, two-dimensional materials, spherical crystals, topological charge

The techniques generate a directivity diagram a slot antenna array with variable polarization. The results of calculation the characteristics of radiation for an array dimension 4x4 elements.

Keywords: AESA, microstrip antennas, spacecraft, remote sensing of the earth.

In the present work we report on the study of local atomic and electronic structure of gold nanoparticles funnctionalised by thiol and amine containing long-chain ligands. The study of nanoscale atomic structure is performed by means of X-ray absorption spectroscopy (XANES: X-ray Absorption Near-Edge Structure) and computer simulation. In consequence of the experimantally obtained data analysis and computer simulation it was obtained that strong bonding takes place when 11-mercaptoundecanoic acid is bound to the gold nanoparticles surface, forming a chemical bond Au-S 0.25 nm in length. Weaker bonding is observed when forming bond between dodecylamine and gold nanoparticles surface atom resulting in Au-N bond 0.23 nm in length. Supplementary XANES spectra analysis by means of density functional theory reveals the nature of formation of the investigated nanoscale structure.

Keywords: nanoscale structure of matter, X-ray absorption spectroscopy, XANES, density functional theory, nanoparticles functionalisation

An estimate of the frequency discretization interval was obtained in solving diagnostic problems of a piezoceramic element by means of different methods based on measuring the active component of conductivity in a number of discrete points. This allows avoiding precision loss and, at the same time, reducing the number of measurements and computational operations.

Keywords: Piesoceramic element, Q-factor, active component of conductivity

The paper studies the possibility of quantitative processing of the GPR data for determining the dielectric permittivity and conductivity of a medium (soil samples). Experimental studies are made using radargrams of soil samples with specified values of moisture and conductivity. New methods of quantitative processing of radargrams are proposed in this work to determine the dielectric permittivity and conductivity of soils. The methods were successfully tested on various sections of Russian railways net.

Keywords: layered road profiling, GPR, soil moisture, soil layers profiling, soil conductivity

This work deals with the study of atomic and electronic structure of kaolinite samples (Glukhovtsy deposit) and montmorillonite (Millerovsky deposit) by density functional theory. The applicability of existing exchange-correlation potential in the local density approximation (LDA) and the generalized gradient approximation (GGA) is analised for an adequate description of the physical properties of layered aluminosilicate. An experimental and theoretical study of the IR spectra of minerals, as well as the identification of the most intense absorption bands, performed in the approximation of DFT using the exchange-correlation potential PW91. The analysis of the band structure of these minerals, which showed that these compounds are direct-gap insulators.

Keywords: DFT, clay, clay minerals, phyllosilicates, atomic and electronic structure, crystalline systems, IR spectrum band strukutra, the electron density

This work deals with the integrated study of the composition and structural characteristics of the rock-forming minerals in Millerovsky bentonite clay. The qualitative and quantitative analysis of the clay samples is made by X-ray diffraction , X-ray photoelectron spectroscopy and thermal analysis . The morphological and microstructural features of minerals are investigated by scanning electron microscopy. The application of the method of direct theoretical calculation of the diffraction patterns is showm to determine the crystal-chemical parameters of the studied minerals. The results are aimed at explaining a number of physical and chemical properties of layered aluminosilicate.

Keywords: clays, clay minerals, layered silicates, x-ray diffraction, crystalline systems

In the article are considered the results of the researches of noncorrodibility of the concrete received with the use of industrial wastes and mineral-chemical additives of various structures in various combinations. Research has shown increase of noncorrodibility, durability and water resistance of the concrete obtained with the use of additives, and the most effective, at that, is the sharing of mineral-chemical additives.

Keywords: concrete, mineral-chemical additives, industrial wastes, noncorrodibility, decstrin, lignosulfonat, kinetic, durability

The problem of utilization of iron ore tailings . The prospects of iron ore mining in the Russian underground . A method for extracting iron from tailings to 9 % of the original content, by mechanochemical processing. The results of particle size distribution , chemical and mineralogical analyzes of samples collected waste ferruginous quartzites LGOK . Experiments were carried out using the methods of planning optimal experiments , Box-Behnken and included 24 experience. Obtained according to the content of metal recovery in the leach solution of sulfuric acid , sodium chloride , rotor speed and the ratio of disintegrant liquid and solid phases. This dependence allows to determine the optimal parameters of technology in terms of " metal recovery ." The resulting secondary processing of tailings to be used in the manufacture of hardening mixes for stowing as an inert filler and binder counterpart .

Keywords: tailings, mechano-chemical activation, iron ore, ferruginous quartzites, metal recovery

The results of computational experiments to determine the characteristics of the porous piezoelectric ceramics based on the methodology, including the effective modules method, simulations of representative volumes on a simple random method and the method of Witten-Sander, finite element method to solve static piezoelectric problems for heterogeneous composite media and the accounting of inhomogeneous polarization near the pores are presented. A comparison of the results of computer simulation with the known experimental data for the porous material PZT-4 and its analogs is realized. It is concluded that the accounting of inhomogeneous polarization in the vicinity of porous provide the better agreement between numerical results and large number of known experimental data. Thus, for most effective constants the smallest errors are obtained for a representative volume of the porous piezoelectric material, constructed by Witten-Sander method.

Keywords: piezocomposite, porous piezoelectric ceramics, inhomogeneous polarization, mathematical modelling, models of representative volumes, finite element method, effective moduli

The problem of the engineering of servo-driver of control of the fuel pump of autonomous diesel generator characterized by alternating frequency rotation of shaft, which can be applied to power supply of remote areas and autonomous objects, is urgent in science because of the lack of studying. The urgency of the engineering of such servo-driver is defined by means of the fact, that their application as a part of autonomous diesel generator allows to receive essential economy of fuel and to prolong motor potential of electric power station.The engineering of the flow sheets of diesel generator based on a synchro generator and characterized by alternating frequency rotation of shaft. The engineering of the flow sheet and algorithm of operation for intellectual servo-driver of control of the fuel pump of autonomous electric power station characterized by the lowered fuel consumption. In article materials of the state contract № 16.526.12.6016 on 11.10.2011 are used

Keywords: electric power station, diesel generator, synchrogenerator, converter.

Tendencies of technological improvement of electronic chips led to reduction of their sizes, weight, development of functionality and decrease in power consumption. It allows us to discuss questions of developing renewable micro power sources which can provide power supply of autonomous microelectronic and micro circuitry systems for charge indication, paying attention to snow transfer, etc. 
The purpose of the paper is researching a profile of electrostatic field potential in the mountain district which was estimated as a possible use as a renewable micro power source.
It is found out that on windward sides of snow relieves the potential of electrostatic field exceeds three times to a similar  indicator for lee sides and is 80 V.  The potential is 3,5kV on polymeric surfaces (Nylon, teflon).   

Keywords: snow storming electricity, electrization, potential of electrostatic field, charge, the salting, the loaded particles of snow, innovation electronics, micro circuitry, renewable micro power sources.

This article deals with the unification of the elements of wood as on the principle of similarity with the material counterpart. Also estimated the economic benefits of the technical parameters of Glulam. As a result of optimizing the size of these elements. Unification is held on the main criterion of similarity bearing members with the solution graphically. Resulting in optimal size sections are then calculated the opportunity cost of production.

Keywords: unification, glued wooden structures