Results of development of new high-performance technology of hardening and balancing of abrasive circles due to drawing detonation ceramic coverings are presented. The method of calculation of rational thickness of the ceramic covering creating in volume of a circle favorable residual squeezing tension is given. The way of balancing of abrasive circles at the expense of the uneven thickness of the covering put on their lateral surfaces is shown. Results of researches of influence of the sizes of abrasive circles at a size of residual tension are presented.

Keywords: Abrasive circle, hardening of an abrasive circle, detonation covering, balancing, internal tension

In article the main approaches to creation of information structure of a post of diagnosing of the car, providing an optimum combination of the logical conditions solved automatically and non-automatic, raktsionalny distribution of information on types and form representations when developing a method and means of diagnosing are stated

Keywords: diagnosing, post, information structure, model

A model system was designed and test  trials of physical and mechanical characteristics of small – crystalline and granular flotation potassium chloride are studied. This model system allows to design storage and transportation  of fertilizers in bulk in railway wagons and it has the same static and vibrational load as real system. The effect of temperature and relative humidity of the air on hygroscopy of small – crystalline and granular КСl were studied. Furthermore the influence of static load, and time length  of compression process of fertilizing layer and parameters of static and vibrational load on composition of КСl granules were investigated. It was experimentally proved that the humidity increase (0,5 %) of granular КСl and the  increase of static load and time length  of compression process of product during transportation in bulk lead to increase of compaction degree and caking ability of product. Research of the influence of high static load (10-30 kg/sm2) and time length of compression process of fertilizing layer on caking ability and degree of compaction show that small – grained KCl has smaller degree of compaction and considerably higher value of caking ability in comparison with granular KCl.

Keywords: Potash fertilizers, storage and transportation, hygroscopy, caking ability, degree of compaction, commodity characteristics of fertilizers

Ingenuity in the new science is different from the inventive technique that invented intangible tools of knowledge - concepts, principles, laws. Modern inventor of new technology, wanting to maximize their arsenal, serious scientific knowledge, without which the inventors treated wheels, the steam engine and mousetraps .In this regard, the development of the Russian innovation system needs a dramatic increase in research universities. The article deals with examples of scientific discoveries that demonstrate that the knowledge economy promising raw material economy. And in first place in the priorities therefore goes high quality engineering education. In Russia almost no programs for innovative engineering, a course which has been developed by Israeli scientists Clement Levkova and Oleg Figovsky. While it is realized only by the Open University Skolkovo. In particular, this course shows that the development of innovative products is the preparation and implementation of innovative changes and consists of interconnected phases forming a unified whole. The innovation process involves the creation, development and dissemination of innovations. It is a common goal of a certain subject innovation economy. This activity is aimed at implementing the completed research and engineering applications in the form of new or significantly improved and marketable product. Results of innovation are new or modified processes used in practice, as well as associated with these changes, additional research and development. Innovative engineering is based on the systematic, focused and coordinated interaction of all participants in the innovation process at the executive level. However, the implementation of the innovation life cycle stages of technical innovation central figure is an innovative engineer. Innovative engineer carried out the task of building a functional model (structural and functional image) future innovation and its prototype. Without the introduction of this course is difficult to expect a breakthrough in the Russian engineering education.

Keywords: engineering education, innovation process, innovative engineering, innovative engineer.

The aim of this work is to study the prevalence of quantitative indicators described earlier implementations of functions and types of soup soup on a number of modern Russian markets, as well as an analysis of the mechanisms of formation of different types of soup. The study tested the accuracy of the following hypotheses.

Keywords: The mechanism of formation, identified types of systems sales management, classification of the types of systems sales management, efficient operation.

Design of the protective hermetic shell of the reactor compartment of the nuclear power plant discusses in the article. The possible deformation of elements of the hermetic shell during preliminary tension  and testing is considered

Keywords: protective hermetic shell; change of form; deformation; strength tests

A new device is offered for the analysis of motor oil contamination of the internal combustion engine with dispersed particles. Optical and ultrasonic methods for analyzing contamination of motor oils are used to obtain more informative data to estimate the concentration of pollutants in the device.  

Keywords: tribomonitoring, electrooptical device, the internal combustion engine, motor oils, methods for analyzing contamination

The paper describes the method for determining the position of the contact wire of electrified railways using microwaves. The method is based on the triangulation system of two georadars and allows to determine a contact wire zigzag and height from the rail head. The proposed method is all-weather with the possibility of continuous monitoring of the overhead contact wire in plan and profile with the opportunity to automate the processing and signaling abnormalities.

Keywords: railroad contact line, contact wire location, GPR, automatic control systems

By self-propagating high-temperature synthesis (SHTS) prepared fine powder оf La2-xSrxNiO4 composition , which is used to obtain dense ceramics exhibiting the properties of n-type semiconductor. Prolonged annealing of the samples resulted in a decrease of the conductivity on the order of 3-4, and the changing nature of the dielectric spectrum: dielectric constant ε' has a stable value of 4·104 Hz in the range of 0,4 − 1·105 Hz .

Keywords: dielectric constant, phase separation, nikelate of strontium lanthanum, self-extending high-temperature synthesis

Article is devoted to the Organization of educational process on discipline "theoretical bases of electrical engineering" at the Department of theoretical and general electrical engineering» NSTU. R.e. Alexeev.  Methodology for teaching the TOE using information technologies developed and tested.  Using  Mathcad and Matlab package gives the best effect in teaching.  The developed method of learning offers a direct use of information technologies in all organizational forms of education.  The efficiency study of theoretical material is enhanced by the use of multimedia lectures on discipline. Mastering the techniques of mathematical modeling in computer mathematics package Mathcad environment occurs in practice. It is in the description of a mathematical algorithm of problem solving. Students describe the mathematical algorithm of problem solving.
Modelling of processes and objects by using the schema of replacement is a Matlab package and MULTISIM ANALOG DEVACES EDITION during laboratory work.  

Keywords: training technique, information technology, theoretical bases of electrical engineering, mathematical packages, MATHCAD, MATLAB и MULTISIM ANALOG DEVACES EDITION, multimedia lectures.

The article presents an approach to synthesis of inhibitory quasi-fields of obstacles for SUGV on-board path planning system, algorithmic basis of which is an adaptive control method for intellectual robots. The inhibitory quasi-fields of obstacles are used for path optimization by safety criteria.

Keywords: Robotics, SUGV, local navigation, path planning, trajectory optimization

This article is devoted to emergence and development of cinema on Don Region. Attention paid on the first picture theatres in Rostov-on-Don, Taganrog and Novocherkassk and their technical equipment (bioscope, biofonograf, teatrograf cosmography, vivantograf, fonohromoskopograf). In this research submitted the first main films and reaction of society and governance on them. As special aspects of cinema industry development viewed problems of professional cinema community and main tendencies of that sphere of cultural life 

Keywords: cinematograph,еlektrobiograf, technology, cinema, picture palace,full-length film, a silent movie, spirituality, development trends

This paper presented the study of the mechanochemical activation powder mix in dry and liquid grinding media, accompanied by agglomeration of the particles. It Is shown that when agglomerate particles having a bimodal size distribution is forming during the treatment in a dry grinding media and partially (2 wt % ) decaying at grinding by pestle in mortar. The transition to liquid grinding media is leading to a unimodal size distribution and increasing dispersion of the agglomerated particles, characterized by secondary agglomerating when using the alcohol and destruction when using activation in saturated aqueous solution of boric acid. Inherited effect mechanical activation parameters on the compaction process during cold compaction and hot stamping has been determined. Application treated in a high energy mill in an grinding media saturated aqueous H3BO3 Al-Si powder mix results in the formation of moldings with low cold-pressing relative density (0.735) and the activation of the hot stamping compaction (|εh| = 0,592) providing production of hot-deformed powder material with increased mechanical properties.

Keywords: mechanochemical activation, hot-deformed powder material, aluminum, silicon, dispersion, agglomeration

A model is presented for the calculation of thermoelastic stress and displacement  in semiconductor structures
due to laser processing. Developed software based on the model allows to determine the optimal parameters of laser processing with taking into account the physical and topological parameters of the structure. The model is divided into two tasks: the non-stationary heat  conduction equation is solved, and the equilibrium equations and Hooke's law. For equations solution was used the finite difference method.

Keywords: Laser processing, thermal stress, finite difference method

An original mathematical model describing different activities of actors in the vertical marketing system is presented. They are a provider, a agent, a trading enterprise are presented as a controlling subjects. The model is based on the game-theoretical and hierarchical approach. An equilibrium of Germeyer G1 game in terms of sustainable development is established. The method of impulsion is used as a method of hierarchical control to solve this model. The main system operation laws based on numerical experiments are presented.

Keywords: game theory, hierarchical, three-level control system, method of impulsion