This article provides an account tsentrenno and eccentrically compressed reinforced concrete columns of high-strength concrete on the deformed pattern in SP 63.13330.2012. Compares the results of the calculation of the bearing capacity of the columns with the set experimental data. Proposed adjustments in the form of the coefficients in the formulas for the curvature tsentrenno compressed columns j and eccentrically compressed yb.

Keywords: high-strength concrete, physical experiment, prism strength, lateral reinforcement, concrete counters, deformation correction factor

In article statistical data on failures on a linear part of the main gas pipelines are presented, the reasons of their emergence are defined. Standard scenarios of development of emergencies are provided, and also the basic principles of determination of frequency of emergence of failures are shined.

Keywords: accident, analysis, diameter, linear part of the main gas pipelines, depressurization, scenario, pipeline.

The article describes directions optimization of supply chains of the consumer market, inventory management of wholesale and retail executives and organizations that make it up. Presented the study methods of inventory control, disclosed the problems of development of modern theoretical and methodological platform of inventory management in wholesale and retail networks.

Keywords: Inventory management, supply chain, wholesale and retail link, logistics optimization.

In article questions of pilot studies of disperse structure of drop ablation are considered when putting electroplated coatings, the technique of performance of experiment is given, the design of experimental installation is considered, results of researches of dependence of height of take-off of drops of ablation over an electrolyte surface from their effective radius are given

Keywords: electroplated coatings, drop ablation, bubbling, drop, height of take-off of a drop, effective radius of a drop

One of the main and most relevant and profitable areas of agricultural production - produce quality seeds in the farms, in the process of post-harvest grain processing. Was evaluated basic parameters of the separation process on the existing scheme sieve winnowing machine with certain technological characterization of the purified grain material according to the different conditions of separation, the possibility of defining a predetermined fraction of a feed and seed quality of purified material. Synthesis was performed variational various separation schemes and functioning to identify optimum operating parameters. According to the results of the experiment set technological possibility and the main characteristics of the process producing high-quality purified fraction of the material given by the scheme, which provides the best performance.

Keywords: grain material, fractionation, modeling, cleaning of grain

The influence of the amount of the addition асфальтогранулята on the properties of asphalt mixes and asphalt. Also considered is the impact of technology of filing асфальтогранулята on physical-mechanical properties of asphalt mixes.

Keywords: old asphalt, asphalt, astringent, physico-mechanical properties, homogeneity.

The optimization of the factors affecting the efficiency of Electro-activation of foam concrete mixes is carried out. For this purpose was applied mathematical planning experiment. As varied factors adopted grain size of sand grains, the value of the applied voltage and the duration of treatment. The mathematical models for strength, high density and structural quality are obtained.

Keywords: Variable electric field, foam-concrete mix, coefficient of structural quality,

В данной статье приводятся примеры стандартных и не стандартных точек контакта с потенциальными клиентами, описаны механизмы их выявления, а также приведены примеры из практического опыта работы авторов по данной теме. Дано определение понятию «клиентоориентированнсть» с точки зрения клиента, и предложены варианты, где применима данная стратегия. Поднят вопрос о качестве обслуживания и что стоит за этим пониманием для клиента, чего он ждет от сферы услуг и на что рассчитывает. В статье рассмотрены этапы анализа точек контакта, приведены примеры влияния этих точек на формирование лояльного отношения клиента к качеству услуг. 

Keywords: услуга, точки контакт, идентификация, стратегия, анализ, клиент, потребитель, контакт, точки взаимодействия, ориентация на клиента

The problem of temperature stresses in revetments of concrete plates taking in the account various conditions of temperature impact is considered. Contact conditions for various friction coefficient are considered. The simulation is made using finite element method in Ansys © software. The examples of exact simulations for stress fields are given for different parameters of problem

Keywords: temperature stresses, concrete plate, finite element method

This paper presents a comparative analysis of the effectiveness of the method Cuthill-McKee algorithm and fill-reducing ordering of a sparse matrix, based on multi-level nested dissection paradigm, developed at the Department of "Computer Science and Engineering," University of Minnesota. For short, we shall call the algorithm Cuthill-McKee CM, and the algorithm of the University of Minnesota — NodeND (Node nested dissection). This article uses a modification of the CM algorithm — RCM (reverse Cuthill-McKee), because in practice the reverse numbering index allows you to get a greater advantage than using a direct algorithm CM. The reason for using these algorithms are high speed computational algorithm, as it is necessary to solve the system proximal to the diagonal, the great acceleration of algorithms for solving FE problems using technology such as CUDA  

Keywords: finite element mesh renumbering methods, three-dimensional mathematical modeling, elasticity theory problems, finite element method, finite element meshes

the analysis of foreign researches, which consist of processes of functioning timber lorries is given. Decrease transport expenses with minimization of empty run of timber lorries and formations of rational structure of this park has been proved.

Keywords: timber lorries, functioning

The nano-catalyst ceria (CeO2), activated by Pt nanoparticles, is known for being prospective and efficient material widely used in catalysis, fuel elements, and sensors. One of the most up-to-date methods of catalysts' reasearch is X-ray absorption spectroscopy (XAS) that is sensitive to the chemical state of catalyst's active centers [1,2]. Using XAS in the fluorescense detection mode at CeL1 line with high precision we studied electronic structure of Pt-activated nanoparticles of ceria at various redox conditions. In order to detect partial X-ray fluorescence yield the emission line CeLγ3 was used, which allowed us to increase spectral resolution. We researched local atomic and electronic structure of the materials under study. Oxygen vacansies were found to appear on the nanoparticles surface of ceria at 5% CO He atmosphere. Theoretical modeling of the obtained spectra at CeL1-edge demonstrated good agreement with experiment.

Keywords: X-ray absorption spectroscopy, HERFD, XAS, Ce-based catalysts, oxygen vacansies

The return coefficient task of determination of properties of a construction design by means of the device of neural networks is considered. As model the neural network in the form of a polutorasloyny predictor with possibility of iterative accumulation of volume is taken. Each subsequent step connected with addition of a new stream of neurons, is carried out only after training of the previous stream. Coefficients of synoptic communications pay off with the help of procedure of the return distribution from a condition of a minimum of function of an assessment. Algorithms of the solution of direct and return problems of multidimensional approximation are developed.

Keywords: neural network, approximation, synoptic communications, return distribution, construction designs

The paper proposes a new relationship for the analytical description of the diagram «b–b» for high-strength concrete of classes C55/67 ... C90/105. The formula developed on the basis of the accepted in EU relation of Sargin and agrees well with the experimental data. A new relation of the ultimate relative deformation of concrete from the strength is developed

Keywords: high-strength concrete, physical experiment, state diagram of concrete, the stress-strain dependence in concrete, the ultimate relative deformation of concrete

Considered the organizational and technological systems in monolithic housing construction as the elements of the organization and management of the construction of production. Offered a choice of variability of the production apparatus , determine the most effective scheme of the system organization monolithic construction . It is recommended the formation of a number of consecutive and concurrent source OTSS interconnected unity of purpose , time and place of the action. Developed of activities that provide improved use of construction equipment.

Keywords: organization, technology, building systems, modeling, research, quality, communication, production, operation