Calculation of coefficient of operating conditions of the pipeline is presented in article for the West Siberian region. Dependence of service life of the pipeline on this coefficient is presented. The data of samples witnesses received in laboratory of nondestructive control, confirming relevance of this subject are provided.

Keywords: corrosion, wall thickness, standard service life, pipeline, coefficient of working conditions, diameter, pressure, settlement resistance.

Consider the choice of coating anodes for electrolysis of sodium hypochlorite nizkokontsentrovannogo 3% solution of sodium salt of food and water of the Black Sea. Defined corrosion resistance of anodes with different laying oxides of ruthenium and iridium and their characteristics: yield chlorine-current voltage on the cell growth dynamics of the concentration of active chlorine in the solution.

Keywords: oxide coatings, iridium, ruthenium, low concentration of sodium hypochlorite, the corrosion resistance of anodes according to the output current of chlorine, the electrolysis of a 3% solution of sodium edible salt and sea water.

This paper presents the application of the model predictive control (MPC) technique for direct vector control  of induction motor drive. Three MPC controllers have been employed; one for adjusting the motor speed, the second for rotor flux control and the last one is specialized for controlling the motor currents. A simple models of induction motor is employed in the MPC structure so as to minimize the computational load. a cassced  The effectiveness of the proposed scheme has been successfully verified through simulations.  The performance of the system including the MPC controller is compared with the corresponding one using the traditional PI controller. The results proved that the induction motor with the MPC controller has superior transient response, and good robustness in face of uncertainties including load disturbance. Moreover, accurate tracking performance has been achieved. 

Keywords: Ac drives, Induction Motor, Model Predictive Control, vector control, field oriented control.

the problems of moisture (cooling) in the mass-transfer apparatus at different parameters of fluid spray and varying the magnitude of the influence of the electric field in the zone of the spray.

Keywords: heat and mass transfer, mist dispersion, electroaerosol, electrostatic dissipation.

Block diagram of the active harmonic filter is considered.  State table inverter power switches active harmonic filter is considered. Calculated the capacitance on the DC link active harmonic filters. The calculation takes into account the power converter losses in the active harmonic filter.

Keywords: active harmonic filter, distortion power, energy storage capacitor

Patent search has been accomplished and guidelines of patenting of stamp-welded wedge valves’ frames for shut-off valves for the plants of > nuclear power, thermal power, oil and gas industries and for main piping are  given. 

Keywords: nuclear power plants, valve industry, pipeline valve, shut-off valve, wedge valve, main piping

The methods of construction and repair of temporary winter roads, proposed technical solution for creating devices that provide a significant increase in strength, bearing capacity and durability of the repaired snegoledovogo cover winter road at full mechanization of the process of recovery.

Keywords: Winter road, a temporary winter road, moisturizing, repairing, mechanized complex snow mass, milling machine, load capacity

The problem of justifying extending the service life of hydraulic structures in Russia is unsatisfactory condition requiring modernization and refurbishment. Currently in Russia over the length of the river network of 2.37 million sq km includes more than 125 thousand rivers that can be used for navigation. When locking, the most widely found as regulator control structures of low pressure shield dam spillways with metal swivel farms most widely used when evaluating the residual life of structural elements carrying water conveyance structures, has an integrated risk assessment of the accident. According to the distribution curves can be classified technical condition of each item, such as rods and plates in various defects as small and dangerous damage the elements included in the design. During the simulation obtained contour plots of stress-bearing low-pressure water-lifting precast shield dams for subsequent prediction justify continued reliable exploitation. The concept of life extension studies supporting structures prefabricated low-pressure water-lifting shield dams on the example of individual structures bearing elements, prefabricated low-pressure water-lifting shield dams, based on modeling of the loading process from various defects and damage due to prolonged use.

Keywords: water-conducting structures, prefabricated pumping low-pressure-mounted dam, modeling, technical condition, residual life.

The substantiation of the need for the preparation of thermal hydraulic drive road construction machinery (SDM) operating in the North. Given that a significant number of failures falls on hydraulic drive elements, it becomes urgent need to study their work and causes of failures. In order to analyze the thermal training funds, the development of new systems is necessary to study thermal characteristics of hydraulic drive elements SDM operated at low subzero temperatures. It is necessary to take into account the rate of change of the processes occurring in the hydraulic drive. In accordance with the above requires a quality measuring equipment, created on the basis of analog-to-digital converters. For this analysis instrumentation for experimental studies. Currently, at the Department of Transportation and technological systems developed hardware and software for temperature measurement system for monitoring hydraulic drive elements SDM.

Keywords: construction machinery, operation, negative temperature, hydraulic, thermal preparation, measurement, sensor

The paper presents and analyzes the main methods of material stimulation of engineers and technician staff on russian and partly foreign enterprises, taking into account national management models. The article highlights the indicators that affect the stimulating part of remuneration for different occasions.

Keywords: engineering and technical personnel, remuneration, the stimulating part of remuneration, performance labor.

This article describes the way of the grain material in grain cleaning unit at various purification schemes. Researches on wheat injury when variii various schemes. Spotted seed purification scheme with the lowest percentage of damaged seeds and basic characteristics agaregata functioning under the scheme.

Keywords: grain material, fractionation, seed cleaning, grain cleaning machine

The article depicts test results of ballastless track system roadbed stressed state. In-situ tests of roadbed vertical stresses were held considering rolling stock type and speed. Roadbed vertical stress distribution dependence was carried out.

Keywords: Roadbed, ballastless track system, RHEDA 2000, vertical stress damping, stress distribution

With the growing fleet's increasingly acute problem arises safety and reliability their exploitation as a result of this increase in productivity and accuracy of their technical diagnostics. Urgent task to further improve diagnosis for vehicles is to develop new methods and algorithms highlight the dominant component of the information in relation to a wide class of vehicles. The methods joint time-frequency and wavelet analysis. To isolate the dominant component of the information proposed to use the method of wavelet decomposition. Using vibro acoustic registration nodes vehicles funds allowed to receive signals carrying information about the defects of individual units of vehicles. The proposed decoding algorithms signals have high reliability, allow technical inspection, subsequent monitoring of the technical state of the vehicle. Using vibroacoustic registration of vehicles allowed nodes receive signals carry-ing information about the defects of individual units of vehicles. The proposed decoding algorithms signals have high reliability, allow technical inspection, subsequent monitoring of the technical state of the vehicle.

Keywords: vehicle, vibroacoustic diagnostics, dominant information, time-frequency analysis, wavelet analysis

Reviews the basic contents of diversification of thermal power plants, which will contribute to improve environmental and economic performance in the industry.

Keywords: diversification, enterprises of power industry, enrichment of coal, ash dumps, pollution, species blade, air pollution, ash, slag ash, secondary resources.

The composite cathode material of the core@shell type with the LiMn2O4@LiCoO2 formula of has been successfully synthesized using the solid-state reactions in several stages. Its structure has been studied by means of X-ray diffraction, scanning and transmission electron microscopy and vibrational infrared spectroscopy. Electrochemical investigation in two-electrode cell has been showed improvement of characteristics of the synthesized cathode material than the constituent components. The specific power of LiMn2O4@LiCoO2 is 650 mWh/g, against 450 and 500 mWh/g for LiCoO2 and LiMn2O4, respectively.

Keywords: lithium-ion batteries, cathode materials, Delafosse, X-ray structural analysis, electron microscopy, electrochemical properties