×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

  • An approach to the operation of a data transmission network protection system against computer attacks based on a hybrid neural network

    The article describes an approach to the operation of a data transmission network protection system against computer attacks based on a hybrid neural network. It is proposed to use a hybrid neural network as a machine learning method. To calculate the output value of neural network signals, the activation function is used. The neural network model consists of recurrent cells - LSTM and GRU. Experiments have demonstrated that the proposed network protection system for detecting computer attacks based on an assessment of the self-similarity of the system functioning parameters using fractal indicators and predicting the impact of cyber attacks by applying the proposed structure of the LSTM neural network has a sufficiently high efficiency in detecting both known and unknown spacecraft. The probability of detecting known spacecraft is 0.96, and the zero-day attack is 0.8.

    Keywords: data transmission network, computer attack, neural network, protection system, network traffic, auto-encoder, accuracy, completeness, detection, classifier, self-similarity, recurrent cells with long short-term memory

  • Content levels and distribution oil products in the components of elementary landscapes according to the mega-profile "Eastern Donbass - the Taganrog Bay coast of the Sea of Azov"

    Еxpedition studies were conducted in order to take samples in the components of elementary landscapes - precipitation (snow), surface waters, roadside dust, soil, bottom sediments and sediments at the water's edge along the route of Shakhty (Eastern Donbass) – Margaritovo village (coast of Taganrog Bay) in the Rostov region. In the selected samples, the mass concentration of oil products (OP) was determined, the analysis of which showed that road dust and snow are one of the sources of soil pollution, surface water and bottom sediments. The following sequence of oil product content levels has been revealed as they decrease: road dust → soil → sediments at the water's edge → bottom sediments → snow → surface water, which persists at almost all but one station. The content of oil products in the soils of the region should be estimated as varying from acceptable to average, while the surface waters contained this pollutant in concentrations below the MPC for the waters of fish farms.

    Keywords: elementary, landscape, natural components, oil products, Rostov region, road dust, soil, bottom sediments, snow, surface water

  • Features of the development and functioning of the Maly Liman Lake as a natural and technogenic system

    The geographical location, tectonic and geological-hydrogeological structure of the Maly Liman Lake basin, its landscape features as a natural monument of regional significance located on the area of the Abraus Peninsula of the Krasnodar Territory were described. The results of current bathymetry studies of the lake were shown. The hypothesis about tectonic origin of its hollow was justified. The sedimentations of the Maly Liman and Abrau lakes were tested and their description was fulfilled. By using radionuclide analysis the sedimentation rates were determined. Expedition work was carried out and a description of the outlets of the perched waters was made. The water balance development models of the of the Maly Liman Lake in the conditions of arid and relatively full-water period were constructed. The perched water dynamics of the upper reaches and surface run-off as the dominant supply sources of the lake was described. A hydrogeological section was constructed along the section of Lake Abrau – Lake Maly Liman. The existence of their hydraulic connection was proved, as well as the presence of two aquifers – the perched water and groundwater.

    Keywords: Maly Liman, Limanchik, Abrau, water balance, sediment layers, bathymetry, ground waters, underground drain, mineralization, sedimentations

  • Dynamics of dry periods on the example of the basins of the Sokolovsky reservoir and the Taganrog Bay

    The paper considers the dynamics of drought periods based on meteorological data for a multi-year period. The research area covers the basins of the Sokolovsky reservoir and the Taganrog Bay. In the course of the study, the following tasks were performed: climatograms were constructed, a correlation analysis of the course of the total amount of precipitation and the course of average annual temperatures was performed, the deviation of air temperatures from the climatic norm for the considered areas was revealed. The tendency to increase the dry period in the Rostov region from north to south has been revealed, which may have an adverse effect on the hydrological regime of water bodies.

    Keywords: dry period, Sokolov reservoir, Taganrog Bay, Rostov region, drought, climate, climate data, precipitation, air temperature

  • Improving the static program analysis based on explicit call graph

    The aim of the study is to develop static analysis algorithms, to search for all possible sequences of function calls leading to a certain point in the program. To achieve this goal the explicit call graph is analyzed, in which all possible paths between two vertices are searched. The analysis is carried out in two stages: 1) at the preparatory stage, a new graph is constructed based on the call graph, from which excess vertices and arcs are removed; 2) in the second stage, a search is made in the new graph for possible paths from the root node to the given one. Also this paper provides an experimental comparison of the developed algorithms with the closest analogue, the Yen algorithm.

    Keywords: static program analysis, call graph, path searching algorithm, Yen's algorithm, call stack

  • Dynamics of atmospheric precipitation in the area of the therapeutic sulfide mud deposits of Lake Bolshoy Tambukan

    The Bolshoy Tambukan Lake bowl is located in an area of extremely favorable hydrological and hydrogeological conditions. This location contributes to natural permanent feeding of water through the atmospheric channel directly to the lake surface and through surface and underground runoff. The absence of a significant increase of the amount of precipitation based on an analysis of their trend in the period from 1911 to 2000 at the weather station "Pyatigorsk" is shown for the first time. An analysis of the results obtained for more than 30 years of observation at the Tambukan weather station indicates a slight increase in atmospheric precipitation, while the level of water in the lake was rised dangerously. One of the main reasons why increase in the water level in the lake happened is unreasonable anthropogenic impact. The lake area afforestation, creation of artificial dams, shafts and ditches in some areas on the shore of the lake lead to accumulation of large volumes of water due to rainfall which then is discharged into the lake through surface and ground runoff.

    Keywords: sulphide therapeutic mud, Bolshoy Tambukan, atmospheric precipitation, groundwater level, surface runoff, ground runoff

  • Testing of samples-witnesses of a reinforced polyethylene gas pipeline

    From the pilot section of the gas pipeline, after ten years of operation, specimen-witnesses were seized. The gas pipeline consists of reinforced polyethylene pipes with an average adhesive reinforcing layer. The results of mechanical tests of model samples are given in the article. Investigations of the deformation-strength properties of the witness specimens show a decrease in the temperature of the viscous-brittle transition to -15 ° C. These results indicate a deterioration in the adhesion between the outer layers of PE80 and the middle technological layer. Good adhesion led to the emergence and development of a fragile crack. Stability tests at constant pressure showed satisfactory results, not a single sample collapsed. According to the research data, the reinforced polyethylene pipe did not deteriorate its deformation-strength properties for ten years of operation of the gas pipeline under pressure.

    Keywords: Reinforced polyethylene pipe, specimen-witnesses, adhesion, stretching, viscous-brittle transition, resistance at constant internal pressure

  • Temperature limits for the use of reinforced polyethylene pipes for gas pipelines in cold climates

    Implemented assessment of the mechanical behavior of reinforced synthetic fibers of polyethylene pipes, which are provided in the construction adhesive layer connecting the reinforcing plastic shells and pipes. Presents the results of quasistatic tests the tensile strength of model samples in the range of low climatic temperature and speed tests 25-100mm/min. The dependence of the temperature of ductile-brittle transition in the mechanism of destruction of model samples of speed tests, which at 100 mm/min up to 0°С. The mechanism of destruction of a model sample of the reinforced polyethylene pipe, consisting in cracking of the technological layer connected with layers of PE80 which ability to braking of a crack and defines transition from viscous destruction to fragile at fall of temperature of tests is interpreted. It appears that this result emphasizes the need to further clarify and harmonize the existing regulatory requirements on the use and operation of pipes and polyethylene pipelines in cold climate regions.

    Keywords: reinforced polyethylene pipe, pipeline, temperature, adhesive layer, strength, crack, viscosity, brittleness, cold climate

  • Technological methods of ensuring the fatigue strength of elastic elements

    As a rule, the information they have guides for fatigue testing geometrical designs, gives only the evaluation of the characteristics and design lay stock in several, and sometimes in tens times exceeds the tensile strength of the material. And saving of material, from the point of view of obsolescence, product should be developed on a certain resource. For details, which operate in the field of elastic deformations and calculated in operation for a given mode of operation should lay in the design of the guaranteed resource. To do this, for example, compensating coupling method is suggested, which is based on the calculation methods of CAD/CAM/CAE/CSE NX 7.5 and field tests considering the impact of technology of surface hardening. The character of strain in «elastic element» in NX 7.5. The calculations of the elastic element module «flexible body» NX 7.5, but due to the fact that the calculation is impossible to consider technological parameters of manufac-turing is conducted equivalent full-scale tests. Accordingly, designed and built a stand for equiva-lent tests. Finally, for comparison, is a computer simulation to calculate large displacements and complicated movements of the coupling. For this we used the application NX 7.5 «Simulation of kinematic mechanisms» with the attraction tools «Flexible body».

    Keywords: diversification of management, production diversification, financial and economic purposes of a diversification, technological purposes of ensuring flexibility of production

  • Amplitude- frequency characteristic (AFC ) amplifier avalanche diode mode microwave detection of amplitude-modulated optical vibrations

    Based solutions of avalanche transit diode amplifier for under the influence of microwave amplitude- modulated optical signal at the p-n junction diode is determined by the response of the amplifier , while a detector device characteristic. We investigate the influence of numerous system parameters on product detection.

    Keywords: frequency response; avalanche diode; amplifier; detector; Microwave amplitude modulated optical vibration .

  • Sensitivity CMOS voltage reference to variations of the parameters of elements

    The article describes the preparation of the sensitivity of the output voltage for a typical architecture of voltage reference to variations of the parameters of elements. Also considers the main advantages of this approach in the analysis and design of circuits. The article presents the corresponding graphs sensitivities. Based on the findings conclusions about the impact of deviations of circuit elements on the output parameters of the reference voltage was done.

    Keywords: Sensitivity, CMOS voltage reference, bias voltage, group bias

  • To the question of sources and volumes of oil components, input into Black sea

    The paper is devoted with the analysis of sources and volumes of oil components’ input into the Black sea. The topicality of this problem is connected with of transboundary the status of water object that contributes to the complexity of such works. Black Sea has important significance for transport and development in the coastal zone of the oil complex, combined with a great recreational potential. As a result, ecosystems are technogenic impact. The paper describes the main natural and anthropogenic sources of oil components in the Black Sea. On the basis of the results of our expeditionary research and analysis of sources of pollutant concluded chronic character oil pollution of the Black Sea. And the conclusion that the most optimistic estimates, entrance of oil components in the ecosystem in the Black Sea is approximately 270 thousand tons per year, which is higher than the currently accepted values of 2−2.5 times. 

    Keywords: sources, volumes, oil components, the Black Sea, hydrocarbons

  • Technology works with increased soil ground water retaining structures

    In this paper the technology of repair of ground water retaining structures soil mixture improved quality with and without soil mixture install.Use soil mixture , improved sharps and ensure the return of ashes (repaired ) slopes and ridge structures of high strength (up to 13-15 MPa) and water resistance , thus increasing the effectiveness and quality of the repair work and increased resistance to the elements of the structures induced defect . The presence of the bran soil mixture not only enhances the strength of 30-40% , but also gives a significant increase in water and frost (20-30 %), which prevent or substantially reduce the infiltration of water through the filtration body water retaining structures , since high strength and frost soil-concrete being laid on a slope ( in the recovery slope failure ) and groove (at soil dumping and capacity to or in excess of the design marks ) will reliably protect the body of the dams ( dams ) of the drawdown , erosion , buckling , suffusion , and other deformities.

    Keywords: technology, dribble feed , soil mixture, sift, cement, fly ash, dam, construction and repair operations, soil mixture installation, factors plan of the experiment, the regression equation

  • Technique of automated control of students' knowledge on the subject "Theory of computational processes"

    Article is devoted to the organization of the control of knowledge on the subject " The theory of computational processes " in the form of automated testing . The proposed methodology of automated control organization of knowledge within the discipline described . Approaches to create a structure sets of tests to select the most appropriate forms of tests are described . Application of the test tasks open and closed forms justified. For testing was selected freeware MyTestX. Features of this program are given . Examples of test items open and closed forms are given .

    Keywords: theory of computational processes, training, automated control of knowledge, testing, test job

  • Features of the feasibility study on organizational and technological design of reconstruction

    In recent years reconstruction of buildings and constructions became one of the main directions in the field of construction. Considering that at reconstruction capital investments it is significantly less, and payback is higher, than at new construction, the share of capital investments in reconstruction will increase.
    It is necessary to apply intensive methods of repair and reconstruction of buildings and constructions as one-time costs of reconstruction and repair there are less than one-time costs of new construction in construction production. Considering a significant amount of the factors significantly influencing the organization of construction at reconstruction of buildings and constructions, previously before development of organizational and technological documentation it is necessary to prepare the list of the data necessary for the organization of construction works and to make their analysis which concerns the analysis of projects and the territory of a building site, including situational plans.

    Keywords: reconstruction, specifics of the organization, factors, systematization, analysis, feasibility study