×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

  • Flame retardant gypsum solutions on expanded vermiculite using volcanic ash

    Fire-retardant gypsum solutions on exfoliated vermiculite were studied using volcanic ash and the multi-functional additive D – 5. It was revealed that the introduction of the D-5 additive by weight from the binder significantly speeds up the setting time of the composite gypsum solution on the expanded vermiculite. gypsum-vermiculite solutions with additives of Portland cement and D – 5 have a higher water resistance.The compositions of composite gypsum solution on exfoliated vermiculite and ash have been developed. It has been established that volcanic ash of a fraction of 0.0–0.315 mm can be replaced by expanded vermiculite without a noticeable increase in average density. Additives of Portland cement and D – 5 increase the strength of the gypsum composite vermiculite solution with ash, the softening coefficient of the composite increases to 0.75.

    Keywords: gypsum, portland cement, expanded vermiculite, volcanic ash, additive D-5, fire protection, gypsum vermiculite solution, tensile strength at bending and compression, average density, softening coefficient

  • Composition gypsum mixes on the pumice with the multifunctional additive

    The results of studies on the development of composition gypsum solution mixtures on the pumice with the application of a multifunctional additive D, are represented. Are proposed the compositions of mortars on composition gypsum that binding and ashes, that make it possible to substantially improve the physicomechanical properties of solution mixtures and solution. The introduction of multifunctional additive D -5 to solution mixtures makes it possible to improve the properties of composition solution mixtures. The developed composition gypsum solution mixtures correspond to requirements ALL-UNION STATE STAN. 28013–98 and have low prime cost due to the use of the pumice

    Keywords: gypsum, portland cement, pumice, additive D -5, composition gypsum mix, transverse strength and compression, density, the coefficient of the softening

  • Teploognezashchitnye composition cement mortar on the basis of the distended vermiculite and the pumice

    Are represented the results of studies on the development of teploognezashchitnykh composition cement solution mixtures on the distended vermiculite and the pumice with the application of a multifunctional additive D -5. Are proposed the compositions of teploognezashchitnykh composition mortars, which make it possible to substantially improve the physicomechanical properties of solution mixtures and solution. The introduction of multifunctional additive D -5 to solution mixtures makes it possible to improve the properties of composition solution mixtures and to improve the characteristics of solution. The replacement of the fine dispersed fraction of the distended vermiculite d0,63 mm does not produce by pumice by the volume in the solution mixtures a noticeable increase in solution density, in this case their strength characteristics grow. The developed composition solution mixtures correspond to requirements ALL-UNION STATE STAN. 28013–98 and have low prime cost due to the use of the pumice

    Keywords: portland cement, the distended vermiculite, pumice, additive D -5, teploognezashchitnyy composition solution, transverse strength and compression, the mobility of mixture, exfoliation property, the density

  • Samouplotnyayushchiesya fine-grained fibrobetony with the application of withdrawals of lithotrity

    Are given the results of studies on the creation of samouplotnyayushchikhsya fine-grained fibrobetonov on the withdrawals of lithotrity with the application of a polyfunctional additive D -5. Are developed the compositions of samouplotnyayushchikhsya fine-grained fibrobetonov with the application of a basaltic fibre, which make it possible to considerably decrease the expenditure of cement and to improve the characteristics of fine-grained concrete mixture and concrete. The use of a polyfunctional additive D -5 in the mixtures makes it possible to increase the strength properties of fine-grained fibrobetonov with a simultaneous improvement in the rheological characteristics of concrete mixtures. The replacement of cement to 10 % from the mass by ashes of fraction d0,14 mm in the fine-grained concrete mixtures does not cause noticeable reduction in the strength properties of concrete. Developed samouplotnyayushchiesya fine-grained fibrobetony possess the increased strength properties and have low prime cost due to the use of local raw material and withdrawals of lithotrity

    Keywords: cement, the withdrawals of lithotrity, ashes, polyfunctional additive D -5, basaltic fiber, samouplotnyayushchiysya fine-grained fibrobeton, strength for the bend and the compression, the mobility of mixture, the plan of the experiment

  • Mortars on the withdrawals of lithotrity

    The results of studies on the development of solution mixtures on the withdrawals of lithotrity with the application of pumice and additive D, are represented. Are proposed the compositions of mortars, which make it possible to substantially reduce the expenditure of portland cement and to simultaneously improve the physicomechanical properties of solution mixtures and solution. The application of a multifunctional additive D -5 in the mixtures makes it possible to increase the strength properties of solution with a simultaneous improvement in the rheological properties of solution mixtures. The replacement of cement to 20 % from the mass by pumice of fraction d0,14 mm in the solution mixtures does not cause noticeable reduction in the strength properties of solution. The developed solution mixtures correspond to requirements ALL-UNION STATE STAN. 28013–98 and have low prime cost due to the use of local raw material and withdrawals of lithotrity

    Keywords: portland cement, the withdrawals of lithotrity, pumice, additive D -5, transverse strength and compression, the mobility of mixture, exfoliation property, the water-holding ability