The results of experimental studies to determine the optimum frequency of rotation of the drum and the optimum ratios of the mechanical gear Electromechanical actuator gravity mixers. Recommendations on the use of different types of actuators depending on the scope of use of the machines.

Keywords: "gravity concrete mixer, Electromechanical actuator, modular design, experiment, mixing drum rotational speed, induction motor, reducer "

The possibility in principle of using pulp and paper industry waste as a binder for pelletization flotation potassium chloride bases on conducted researches. Defined technical conditions of pelletization flotation potassium chloride using pulp and paper industry’s waste as binder provide product with good commercial qualities, which are yield of marketable fraction (85.71 %) and resistance of granule (29.51 N). The researches for studying conditions of baking were conducted and subsisted defects on granule surfaces. There are two kinds of defects. One of them is inner defect is represented as caverns and flaws. Another type of defects are outer defects. They are represented as crystallized structural arrangements in the form of coreless tube that has net structure and includes fiber and cubic shaped microcrystals. Granule defects form after baking them with temperature higher than 120ºC.

Keywords: flotation potassium chloride; pulp and paper wastes; adhesive; commodity characteristics of fertilizers, defects granules

The paper is concerned with development of calculation procedure of residual forming of type parts "bush" by electric resistance surfacing with a wire (ERSWW) using the finite element method (FEM) based on the theory of non-isothermal plastic flow. The adequacy of the design model is confirmed by the experimental data. The developed calculation procedure of residual forming allows to predict the possible axial and radial movement of type parts "bush" by ERSWW of outer surfaces in a single layer, that allows to make a decision on the feasibility and appropriateness of technology ERSWW during restoring of type parts "bush".

Keywords: electric resistance surfacing with a wire; residual forming of type parts "bush"; finite element method; calculation procedure

The article deals with the nature of interrelation of the phenomena ""preservation of national value traditions"" and ""ensuring economic dynamism"" in the context of the strengthening of the national security of Russia in the era of information revolution and the transition to new technological way which is characterized by such relevant characteristics as the intellectualization of industries, the development of new technologies of management and continuous education, the formation of cultural and informational environment. The models of cultural enlightenment and cultural development focused on the resources provision and technological support of socio-cultural and economic (in the innovative vein) development of the country through the partnership of the state and society are described in the article, taking into account the state cultural policy tools as author’s cognitive methodological construct aimed at the accumulation of powerful protective potential of the Russian culture in the practice of public administration.

Keywords: State cultural policy, national security, cultural enlightenment, cultural development, “soft power”, innovative development

The technique of pilot natural studies by definition of critical effort at which there is a capsizing of the trees together with root system growing on coast of reservoirs of the hydroelectric power stations subject to washout as a result of impact of fluctuations of water level, wind, wave loadings and abrasion is given It is necessary for establishment of possibility of use of trees of a coastal zone as support of rope system of devices for collecting and transportation of wood. Pilot studies were conducted on Bratsk and Ust-Ilimsk reservoirs during the period from 2000 to 2012.

Keywords: coastal zone of reservoirs, the washed-away coast, the coastal water area, critical effort, wind loading, effort of rooting out, prism of roots , support of rope installation, wood transportation, "ownerless wood"

In article considered new rigging locks, for reliable fastening of raft side binding, chains, bindings when forming sections, rulers and rafts from assortments and switches, and also the "ownerless" wood with various dimensional characteristics differing in simplicity, availability and low cost of their production in the conditions of repair bases the timber floating of the enterprises are described.

Keywords: rigging lock, timber bundling, raft, wood alloy, "ownerless wood", coastal water area

In article service conditions of one of the most important systems of mobile cars – a hydraulic actuator, especially under the influence of the negative temperature of air are considered. Ways of prestarting heating and maintenance of temperature of working liquid in use of transport and technological mobile cars are described. The main advantages and the applied systems and devices come to light. The original system of regulation of temperature of working liquid in a hydraulic actuator which will allow to increase efficiency, reliability and accuracy of regulation of temperature is offered.

Keywords: hydraulic actuator, working capacity, negative temperatures, viscosity, friction, power, torque

The article describes the construction of a modern forest instrument for forest inventory operations. The equipment consists of a caliper and a built-in marking device. The developed construction allows conducting two operations simultaneously: determination of a trunk diameter and marking a measured tree trunk. The suggested construction leaves visual marks on measured tree trunks automatically, that allows avoiding doubling of measuring results.

Keywords: marker, caliper, trunk, taxation

An important direction for sustainable development of domestic production is a complex use of wood resources. In Russia there is a large amount of wood resources. Waste is generated at all stages of logging and woodworking processes. Researchers estimate in the Russian Federation annually produces about 35.5 million m3 of wood waste. Wastes produced by various physico-chemical, size, quality and other characteristics. Range of directions of development of waste from the activities of the forest industry is also great. Depending on the type of wood waste can be used in different directions of the domestic industry. The increasing use of waste wood resources is the most important link in the development of policy, resource conservation, environmental management, environmental safety. The study is supported by RFFI (grant No. 15-46-04294) and KGAU "KKFPNiNTD" (project: "Development of expert system on environmental protection and recycling of various wastes of production and consumption")

Keywords: the use of wood waste, sustainable development, environmental protection, technology for logging operations, wood processing, forest residues, comprehensive utilization of wood, environmental management, forest residues

The study combined methods of influence on agricultural inputs in the process of post-harvest handling is largely associated with the development of instrumentation that allows to control the factors that affect the material. The article describes the results of theoretical and experimental studies to determine the electromagnetic field in a layer of grain material undergoing microwave treatment. In the field of theoretical research will come an exponential decay law of an electromagnetic wave in the material and the model built in the software package CST Studio. It is also a view of equipment designed for the experimental evaluation of the field intensity and its distribution pattern in the layer of the processed product. The dependences describing the measurement principle is implemented in this device. It provides an assessment of compliance with the theoretical and experimental methods of measurement. Increasing the accuracy of the experimental measurements can be achieved through the use of optical contact temperature sensors, as well as the use for the manufacture of the receiving materials with known data reliably dielectric properties in a given temperature range. The data obtained can be used for determining structural parameters of the microwave exposure zone, and for the development of control systems equipment. Finally, the conclusions based on the results of the work presented.

Keywords: energy efficiency, the microwave field, thermal processing of grain, field modeling, direct heating, dielectric

The article presents a statistical analysis of non-compliance with safety at work over the past few years, the reasons for violation of safety rules and consequences such as industrial injuries, occupational disease and mortality in the enterprises of the Russian Federation. Based on the analysis, the most dangerous in terms of the safety industry are the companies of the construction industry.

Keywords: labor protection, safety requirements, the company building industry, industrial injuries, occupational disease, labor protection measures, ability to work, harmful and dangerous production factors

is considered the study of the issues of higher education come from families with middle and higher education as part of the impact level educate parents on the quality of education students. Topicality of this article is caused not only an analysis of the availability of research in higher education, but also the possibility of receiving it. The concepts of "cultural capital" discussed in the article allows modern Russian youth to understand and realize the importance of quality education, in view of the indicators and aspects that are inherent in a given social environment. Regardless of the level of education of the family in modern society, to establish certain criteria when choosing a higher educational institution allowing to find themselves in the current economic realiyah.

Keywords: ducation, parental education, cultural capital, income, socially privileged layers

In article it is shown that a perspective way of reduction of an acute shortage of the qualified engineering shots in the country is use of innovative forms of interaction of universities and manufacturing installations. Experience of creation on the basis of the enterprises of a machine-building division of Rosatom State corporation of JSC "Machine-building plant "ZiO-Podolsk" and JSC "Petrozavodskmash" of chair "Power Engineering" of NRNU MEPhI is described.

Keywords: interaction, innovative forms, manufacturing installations, universities

One of the criteria for the effective operation of modern machines, machinery, tools and devices is a quiet drive. Research noise generation in mechanical gears is important. A modernization drive with a flexible link, as a method of solving the problem of noise reduction.

Keywords: noise, vibration, drive, machine, mechanism, chain drive, toothed belt drive, a study, a flexible connection

One of the criteria for the effective operation of modern machines, machinery, tools and devices is a quiet drive. Research noise generation in mechanical gears is important. A modernization drive with a flexible link, as a method of solving the problem of noise reduction.

Keywords: noise, vibration, drive, machine, mechanism, chain drive, toothed belt drive, a study, a flexible connection