In this paper discussed the main problems when choosing the optimal reservation of information systems. The algorithm of optimization of redundant information systems. Defines the basic concepts of developing mathematical models of redundant information systems. Given and illustrated by an example of calculation of the main reliability characteristics of a redundant information system.

Keywords: mathematical model, simulation, redundancy, information system

The article discusses the possibilities of using forklift trucks (stacker-reach trucks) for mechanized installation of dividing walls, when cast-in-place slabs are assembled or manufactured. It is emphasized that in the early 1980s similar equipment that didn’t have a series production, was used in the construction of buildings by the lift-slab method. Some technical characteristics of the old equipment and modern warehouse equipment are compared, the advantages of the modern are revealed. It is noted that the simultaneous use of warehouse equipment on several floors of the erected frame building can lead to a significant reduction in the construction time. It is also indicated that the stacker-reach trucks used at the construction site are multifunctional, since they can not only transport construction cargo but also serve as an auxiliary equipment for safe work at a certain altitude when performing welding operations and fixing joints.

Keywords: precast and cast-in-situ frame building, mechanized installation of dividing walls, remote site, forklift truck, stacker-reach truck, working site

At institute of architecture and construction of the Volgograd state technical university (IAIS VOLGGTA)) for more than thirty years the researches directed to decrease in pylepostupleniye on urban air environment are conducted. Some schemes of configuration of systems of dust removal of emissions with dust collectors on the counter twirled twirled flows (VZP) realized at various enterprises are provided in article.

Keywords: devices VZP, system of dust removal, scheme of configuration, pyleochistka, efficiency of a pyleochistka

The paper proposes a modification of earlier mentioned method reduces the number of computing operations and improve the accuracy of estimating the phase shift, which is close to the limit set by the Cramer-Rao inequality. The article also presents the results of numerical modeling of systematic and random errors parametric estimation of the phase shift angle of the proposed method.

Keywords: phase shift quasi-harmonic signal, Cramer-Rao lower band, parametric method

The analytical assessment of change of office properties of heavy-duty details of friction pairs of the cart of the freight car on the first depot repair is presented. The technique of definition of iznos of details of the cart is applied to determination of faults. The most subject are shown to defects nodes of the cart of the freight car.

Keywords: cart of the freight car, frictional wedge, cap of a skolzun, thrust bearing disk, frictional level, wear, wear resistance, defects of the cart of the car

Recent advances in chemistry and technology of nonisocyanate polyurethane (NIPU) materials based on cyclic carbonate oligomers are reviewed in this paper. Reaction of the cyclic carbonate and amino groups results in β-hydroxyurethane fragments with specific properties. Primary attention is given to the hybrid materials that contain epoxy and acrylic compounds, especially materials based on renewable raw materials. Hybrid organic composites comprising of silanes are also considered. An overview of the recent publications in this field is provided with a more detailed description of achievements by the authors and their corporate employees. The use of NIPU materials as coatings, adhesives, and foams is described.

Keywords: nonisocyanate polyurethanes, cyclic carbonate oligomers, hybrid polymers

Abstract: the Article is devoted to the problem of waste production during construction, operation and liquidation of coal mines of Russia. This work suggests that waste recycling technologies, including for reception of energy based on the modeling and system analysis of the biocenosis. The possibility of realization of innovative methods of processing plethodon using the biocenosis. Quite detailed questions transformation of industrial waste into energy through anaerobic bioconversion. As part of a description of the proposed methodology presents the results of field experiments and action program of recycling of materials at the stage of commercial operation. In particular it justifies the optimization of processing technology on the basis of the selection of the most active biocenosis of microorganisms. Theoretical developments are confirmed by practical data.

Keywords: disposal, technogenic resources, plothole, biotechnology, biotransformation, biocenosis, recycling

It is shown that one of the most important elements influencing the nature of development in the region is socio-ethno-cultural landscape. The study of its characteristics suggests a wide use of methods of social simulation. The purpose of modeling is to estimate the required parameters in conditions of uncertainty, both at the planning stage and during the current administration. Theoretical solutions to this challenge are based on the use of the principle of duality, when the production and analysis of missing information about a managed object, in our case about socio-ethno-cultural landscape, the system is in the process of governance. The duality of the models appears in their dual role as research (for monitoring characteristics of socio-ethno-cultural landscape and, at the same time as the reference models for the management of development in the region. Need of approbation and problem integration of methods of the system analysis, social diagnostics and social and mathematical modeling which will make new scientific methodology of research is shown. To solve the problem of this level is proposed for effective convergence of methodological knowledge in the use of total potential informational, cognitive, and socio-humanitarian technologies.

Keywords: dsimulation, dual simulation, socio-ethno-cultural landscape, managing the development of the region

In this paper developed solid model of the cap of a side bearing. It made of cast iron of (ВАГР-113.00.00.006) Altai steel casting factory (ASCF). We simulated desing technologikal parametrs, wich give casting disinh without casting defects.

Keywords: technology, modeling, pig-iron cap of a side bearing, solid-state model of a pig-iron cap of a side bearing

In the framework of the given article shall be considered a negative impact on microorganisms of ions of zinc, copper and Nickel concentrations in the incoming wastewater to the wastewater treatment facilities of the cities of the Lower Volga region is unacceptably high, which inevitably reduces the quality of the purified water at the indicated metals exceeding the output after biological treatment is more than 30 times). Further, in the proposed article, we describe the results of studies aimed at disposal and treatment of waste activated sludge. The first attempt to use the resulting after biological purification of waste as a secondary raw material for the adsorption material, which retrieves the designated heavy metal ions from wastewaters prior to biological treatment, which allows further the activated sludge fully interact with other ions without losing their functions. As a result, after the biological cycle treated water at the indicated metals, meets the relevant standards.

Keywords: urban wastewater, biological treatment, heavy metal ions, sorption, activated sludge, adsorbent, filter segment

The study combined methods of influence on agricultural inputs in the process of post-harvest handling is largely associated with the development of instrumentation that allows to control the factors that affect the material. The article describes the results of theoretical and experimental studies to determine the electromagnetic field in a layer of grain material undergoing microwave treatment. In the field of theoretical research will come an exponential decay law of an electromagnetic wave in the material and the model built in the software package CST Studio. It is also a view of equipment designed for the experimental evaluation of the field intensity and its distribution pattern in the layer of the processed product. The dependences describing the measurement principle is implemented in this device. It provides an assessment of compliance with the theoretical and experimental methods of measurement. Increasing the accuracy of the experimental measurements can be achieved through the use of optical contact temperature sensors, as well as the use for the manufacture of the receiving materials with known data reliably dielectric properties in a given temperature range. The data obtained can be used for determining structural parameters of the microwave exposure zone, and for the development of control systems equipment. Finally, the conclusions based on the results of the work presented.

Keywords: energy efficiency, the microwave field, thermal processing of grain, field modeling, direct heating, dielectric

In article reviewed advanced theoretical probability models of process quality formation quality of the surface layer in a centrifugal rotary process (CSO) details. Process CSO reviewed from the point of view reliability. Based on the results of theoretical studies were proposed the dependence of the influence of the main technological parameters centrifugal rotary finishing and strengthening treatment on the roughness of the processed surface, the depth of the hardened layer and the degree of hardening. Analysis of the technology processes CSO let to identify the factors exerting a dominant influence on the productivity and quality of processing. Conducted calculations of the influence the tolerances of the main quality parameters of the surface layer and technology modes centrifugal rotary processing of centrifugal rotary treatment on the magnitude of the coefficients offset instantaneous dispersion and stock accuracy which characterize the reliability of technological processes centrifugal rotary process. By results of calculations were constructed charts. Taking the presented methodology you can choose such a combination in choosing technological processes centrifugal rotary processing what will ensure the required quality of the workpiece.

Keywords: Reliability technology process, centrifugal rotary process, coefficients offset instantaneous dispersion, the roughness surface, the degree of hardening.

Recent advances in chemistry and technology of nonisocyanate polyurethane (NIPU) materials based on cyclic carbonate oligomers are reviewed in this paper. Reaction of the cyclic carbonate and amino groups results in β-hydroxyurethane fragments with specific properties. Primary attention is given to the hybrid materials that contain epoxy and acrylic compounds, especially materials based on renewable raw materials. Hybrid organic composites comprising of silanes are also considered. An overview of the recent publications in this field is provided with a more detailed description of achievements by the authors and their corporate employees. The use of NIPU materials as coatings, adhesives, and foams is described.

Keywords: nonisocyanate polyurethanes, cyclic carbonate oligomers, hybrid polymers

The factors affecting the formation of the intellectual property in economic structures. It is shown that the most important of them are: business entity formed in an innovative atmosphere, staff training and the ownership of the methodology of inventive problem solving, formed the scientific and innovative school, the presence of structure responsible for the protection of intellectual property, participation in grants initiated by the Ministry of Education and Science of Russia (in vol. h. performed under the Resolution of the Russian Government and aimed at the integration of universities with the production), access to databases of scientific and technical information.

Keywords: intellectual property, intensification, formation, protection of patents

In this article is reviewed the nature of organic hybrid nanocomposites. Promising directions in the field of organic hybrid nanocomposite materials will be methods for the synthesis of multicomponent materials, as well as the type of "net net" and "host-guest". The fundamental problem with the chemistry and physics of nanocomposites is dependent "structure-property". Solving this problem will move from research materials to their purposeful design.

Keywords: nanocomposite sol-gel technology, synthesis, nanoparticles.