Acoustic system parameters were selected and calculated: wave modes used when controlling, wave entry and frequency angles according to kind of decay process and ultrasonic attenuation. Control procedure was developed

Keywords: ultrozvuk, frequency, attenuation process, technology, acoustic system

Consider the choice of coating anodes for electrolysis of sodium hypochlorite nizkokontsentrovannogo 3% solution of sodium salt of food and water of the Black Sea. Defined corrosion resistance of anodes with different laying oxides of ruthenium and iridium and their characteristics: yield chlorine-current voltage on the cell growth dynamics of the concentration of active chlorine in the solution.

Keywords: oxide coatings, iridium, ruthenium, low concentration of sodium hypochlorite, the corrosion resistance of anodes according to the output current of chlorine, the electrolysis of a 3% solution of sodium edible salt and sea water.

The article is devoted to the problem of radiation security, that must be carried out in the technological process of equipment dismantle of nuclear power plants’(NPP) blocks removed from the exploitation. According to these requirements the structural-parametrical adaptation of technological process should be held during the projecting

Keywords: NPP block, removing from exploitation, equipment dismantle, technological process, radiation security, normative regulation, engineer- radiation inspection, dosimetric control, the procedure of radiation security providing, the structural-parametrical ada

In article the material about use of interactive training programs in educational process of the students training difficult household appliances is prepared. 
Within transition of the higher educational school to provisions of Bologna Process by a leading method of pedagogical work there is a competence-based approach to formation of steady knowledge and practical skills at students [1]. Indispensable condition thus is compliance of quality of training and the general education standard. As especially important requirement continuous control of assimilation of educational information and ability of its application serves in practical activities. The most well-tried remedy of total control of assimilation of educational information is carrying out daily testing, including remote. Use of test interactive programs becomes more actual at integration of groups and increase of an academic load on the teacher [2].  

Keywords: criterion of efficiency, intensity of thermal streams, refrigeration machine, inflow and selection of heat, vaporizer

This paper is focused on the research of important marketing approach called "word of mouth”. Possibilities of Flocktory as referral marketing tool that has no analogues on the Russian market we studied. Analyzed performance of platform clients. Main competitors, their strengths and weaknesses were defined.

Keywords: Platform Flocktory, referral marketing, advertising, social media, online shopping

This article describes the way of the grain material in grain cleaning unit at various purification schemes. Researches on wheat injury when variii various schemes. Spotted seed purification scheme with the lowest percentage of damaged seeds and basic characteristics agaregata functioning under the scheme.

Keywords: grain material, fractionation, seed cleaning, grain cleaning machine

The article depicts test results of ballastless track system roadbed stressed state. In-situ tests of roadbed vertical stresses were held considering rolling stock type and speed. Roadbed vertical stress distribution dependence was carried out.

Keywords: Roadbed, ballastless track system, RHEDA 2000, vertical stress damping, stress distribution

With the growing fleet's increasingly acute problem arises safety and reliability their exploitation as a result of this increase in productivity and accuracy of their technical diagnostics. Urgent task to further improve diagnosis for vehicles is to develop new methods and algorithms highlight the dominant component of the information in relation to a wide class of vehicles. The methods joint time-frequency and wavelet analysis. To isolate the dominant component of the information proposed to use the method of wavelet decomposition. Using vibro acoustic registration nodes vehicles funds allowed to receive signals carrying information about the defects of individual units of vehicles. The proposed decoding algorithms signals have high reliability, allow technical inspection, subsequent monitoring of the technical state of the vehicle. Using vibroacoustic registration of vehicles allowed nodes receive signals carry-ing information about the defects of individual units of vehicles. The proposed decoding algorithms signals have high reliability, allow technical inspection, subsequent monitoring of the technical state of the vehicle.

Keywords: vehicle, vibroacoustic diagnostics, dominant information, time-frequency analysis, wavelet analysis

The composite cathode material of the core@shell type with the LiMn2O4@LiCoO2 formula of has been successfully synthesized using the solid-state reactions in several stages. Its structure has been studied by means of X-ray diffraction, scanning and transmission electron microscopy and vibrational infrared spectroscopy. Electrochemical investigation in two-electrode cell has been showed improvement of characteristics of the synthesized cathode material than the constituent components. The specific power of LiMn2O4@LiCoO2 is 650 mWh/g, against 450 and 500 mWh/g for LiCoO2 and LiMn2O4, respectively.

Keywords: lithium-ion batteries, cathode materials, Delafosse, X-ray structural analysis, electron microscopy, electrochemical properties

The solid solution of  LiMn1/3Cr1/3Fe1/3O2 with the structure of α-NaFeO2  isostructural with the widely used LiCoO2  has been synthesized and investigated as a cathode material. Rated voltage of LiMn1/3Cr1/3Fe1/3O2  relative to the lithium is 4 V.  The possibility of charging − discharging the material to a specific capacity of 220-250 mAh/g at currents of C/15-C/50 without phase transformations has been experimentally demonstrated. 

Keywords: lithium-ion batteries, cathode materials, Delafosse, solid solution, X-ray structural analysis, electrochemical properties

The results of calculations on the stability of slope lands treated in a new way. Device intrasoil walls combined with loosened intervals allows prevent subsurface runoff water, which reduces surface erosion slopes, improves the fertility of farmland returns a highly eroded areas in turn, eliminates the wetlands at the foot of the slopes. Established that the stability of the treated soil layer on the slope ample.

Keywords: stability of sloping land, subsurface walls, soil subsurface runoff, soil erosion, wetlands, deep tillage, moisture saturation slope.

Some aspects of the use of fuzzy logic to generate a mathematical model to search for objects on the sea. Describes how to use the algorithm Mamdani, to create a model of fuzzy inference. Section gives an example of the use of Fuzzy Logic Toolbox package Matlab, for the simulation of fuzzy search engine and determine the optimal solution of the problem to find the object.

Keywords: mathematical model, fuzzy logic, object search algorithm Mamdani, membership function

We propose a method for constructing of algorithm of smooth management by the hydraulic actuator  based on the method of combining the maximum principle. Such management increases the accuracy and non-failure operation of operation of the device

Keywords: the integrated principle of a maximum, management, the hydraulic actuator, synthesizing function, management synthesis, asynchronous variation

The combination of the unique, abnormal properties shown by oxidic systems with structure of spinel on the basis of transitional elements chromites draws attention of researchers for many years. Some systems on the basis of transitional elements chromites (for example, nickel and copper chromites) have critical elements (multicritical points, lines of phase transitions of the second sort, etc.) on the phase chart. Near these elements of the phase chart materials possess unique chemical and physical properties. Therefore development methods of receiving and research of phase forming and properties in NIO-CoO-CuO-Cr2O3 system represent fundamental and practical interest for chemistry and technology of inorganic substances. In this work processes of spinel structure formation in system 0,6 NiCr2O4 – 0,2 CoCr2O4 – 0,2 CuCr2O4 from crystal chemistry positions are considered. Formation of two solid solutions on the basis of nickel (II) chromite – with structure of cubic spinel and with tetragonal distorted structure is established. The influence of cooperative Yahn-Teller effect on processes of a spinel forming and on stabilizing impact of chloride of potassium on process of education of  two spinel solid solutions is suggested. Influence of a power factor of cation stabilization in knots of a crystal lattice as one of the important factor in reaction of spinel structure formation is considered.

Keywords: spinels, chromites of transitional elements, Jahn-Teller effect

Article dedicated to design technologies of socio-cultural and ethno-political development of southern Russia. Proposed the concept of regional research programs.

Keywords: South Russia, Southern Federal University, technology, program, facility