Article considers actual problems of the organization of the construction of temporary roads and crossings in winter conditions. Displayed an innovative approach in the construction of these linear facilities. We study the timing and resuse used in the construction of roads and crossings.

Keywords: organization of construction; innovation; road construction; project management

Providing the claimed performance characteristics of the absorber throughout its life is the most important task that ensures the correct operation of the coupler. Increasing requirements for increasing the speed of movement and the volume of freight traffic make it urgent to increase the reliability of the absorbing apparatus by improving the design of its components and components (housing, friction plates, wedge, etc.).

Keywords: Absorbing apparatus, friction plate, cermet, surface wear, defects in absorbing apparatus

Contact network work in winter conditions is much more difficult than usual. The most hard contact network mode of operation is the mode of ice with wind, which increase wind and ice load on wires and cables, reference and supporting structures. Ice loading on the wires and wind effects significantly impair the conditions of current pick-off and coupled with operational factors can cause an accident and lead to a trains stop. From this perspective the detection of glaze-ice and rime deposition in the early stages with its minimal thickness becomes of vital importance. The article examines the methods of early detection of icing which are used on the transmission lines and the ability of these methods to be used in the contact network. The terms of the contact network and power lines are different that’s why not all methods used on the transmission lines can be used. The thermodynamic method of determining the ice is observed as the main. The set of equipment that implements this method and the installation option on the contact network part have been represented.

Keywords: overhead construction, contact wire, span wire, icing, workload, detection system, control methods, glaze-ice and rime deposition, power dispatcher, the thickness of the deposits, wire breakage, information

Obtained in the course of work the results show that the heat loss through fasteners ventilated facade is 40.5% of the total heat loss through the outer face of the facade. Using the data obtained for the evaluation of the heat losses of a 7 - storey residential building in the city of Nalchik, with a total area of external walling 2.470 sq. m. found that at a temperature difference of 39°C for 1 hour in the wall is the thermal energy in the amount of 57 kW«h, including 23.1 kW«h refer to the heat loss via the fastening elements of the facade panels, for 24 hours through heat-conducting inclusions is lost 554.4 kW«h For 7 months of the heating period with an average temperature of 28°C the heat loss will be 83745.7 kW«h Taking the cost of 1 kW«h of electricity 3.47 RUB and assess the rate of heat loss through the frame of a ventilated facade in cash for the entire heating period, will receive additional heat loss through the frame of a ventilated facade cost 290597 RUB.

Keywords: temperature field, heat-conducting inclusions, ventilated facade, heat, heat flux, fasteners

This article includes mathematical models that optimize transportation costs flakiness rubble and dropouts

Keywords: flakiness broken stone, gravel, mathematical models, transport, optimization of transport costs

The article proposes a special device which enables to improve the preparative processes during the main pipeline break at any technique of general maintenance or trench breaking. The device has been made to fix characteristic points on the surface of the earth. The application will enable to exclude the use of stakes or pegs driven into the ground. The device allows to continuously mark the space without stopping the machine to apply a special mix. The use of the marking on portions of pipeline bends will enable to cut the volume of the ground extracted from the trench and therefore to reduce the length of stripping. The application of the device will allow to improve the preparative processes prior to stripping works. The use of the proposed device will give the opportunity of its application in all the climatic conditions nationwide.

Keywords: Akhmedov A. M.

The article proposes an innovative device to install main pipes sections into strings when building and maintaining the linear pipeline portion. The spacial process flowcharts are given to install main pipeline sections into strings and the general view of the proposed device. The application of the device will enable to reduce the number of the pipe-laying machines and to completely avoid the application of special devices and mechanisms when supporting sections and and adjusting their edges to perform welding and insulation works. The device can be used also for tying in of the 24 and 36 m strings into one branch. One can achieve a considerable simplification of the working operation for adjustment and matching the edges of the two extended pipe sections. The proposed device will improve the equipment for the repair and construction site in general and to enhance the quality of the active works.

Keywords: main pipeline, general maintenance, adjustment of pipe sections, building of the linear portions of main pipelines, repair and construction site.

Brain neural networks models based on the model of Hodgkin-Huxley and the inhibitory and excitatory postsynaptic potentials EPSP and IPSP balance problem are investigated. The problem of the inhibitory and excitatory postsynaptic potential balance, affecting such person's ability as learning, memory, movement, ability to analyze and so on has great scientific and practical importance. Implementation of the model Hodgkin-Huxley in the Matlab environment is made. Model modification is considered given the occurrence of a synapse in neuron system.

Keywords: mathematical modeling, EPSP, IPSP, ionic channel, modified model parameter, neural network model, Hodgkin-Huxley

Thermoresistors nowadays are used not only as parts of temperature sensors and flowmeters but they are used as components of starting and control devices. Use of low-powered thermoresistors as starting and control devices parts needs a lot of devices that reduces equipment reliability. Current step-up running through motor-starting devices simplifies control circuit. For using thermoresistors in electric circuits with high-discharge rate it is necessary to use special constructions in order not to let termoresistor body be overheated. Thermoresistor expansion results in changing of thermal fields distribution pattern inside this semiconductor. The authors show calculated characteristics which let determine proportions and shapes of semiconductor subject to thermoresistor temperature.

Keywords: high power thermoresistors, thermoresistors of coaxial type, current density, temperature, analogy criterion, thermal conductance, temperature gradient, thermal field, stability criterion

At institute of architecture and construction of the Volgograd state technical university (IAIS VOLGGTA)) for more than thirty years the researches directed to decrease in pylepostupleniye on urban air environment are conducted. Some schemes of configuration of systems of dust removal of emissions with dust collectors on the counter twirled twirled flows (VZP) realized at various enterprises are provided in article.

Keywords: devices VZP, system of dust removal, scheme of configuration, pyleochistka, efficiency of a pyleochistka

considers the questions of improvement of road winter road Bilibino – Anyuisk held in the area of Bilibino. On the basis of the calculations for modeling correspondences and intensity of movement of motor transport on the roads on a 20-year term.The calculations of the volumes of freight and passenger traffic calculated annual mean daily intensity and composition of motor traffic for the year 2016 and the forecast for 2020 and 2030 for the construction of corrugated metal pipe of large diameter with approaches across the Creek Midday on 150 km of an improved winter road with an extended period of exploitation Bilibino – Anyuisk also given in the article

Keywords: construction, automotive, station, passenger transport, winter road, the length, zoning, space, roads, Chukotka

The analytical assessment of change of office properties of heavy-duty details of friction pairs of the cart of the freight car on the first depot repair is presented. The technique of definition of iznos of details of the cart is applied to determination of faults. The most subject are shown to defects nodes of the cart of the freight car.

Keywords: cart of the freight car, frictional wedge, cap of a skolzun, thrust bearing disk, frictional level, wear, wear resistance, defects of the cart of the car

Numerical-analytical solution of the problem of multicomponent mixture fractionation under action an electric field is constructed. This problem is known as the problem of zonal electrophoresis which extensively used in chemistry, medicine, and biology. Problem is reduced to study of the Cauchy problem for systems of hyperbolic type quasilinear equations in partial derivatives of first order. The proposed method is based on a generalized hodograph method, which allows obtaining an analytical solution of the problem in implicit form. Explicit form of the solution is recovered using the transformation of the Cauchy problem for system of quasilinear hyperbolic equations to the Cauchy problem for a system of ordinary differential equations that are solved numerically.

Keywords: electrophoresis, hyperbolic conservation laws, generalized hodograph method

Abstract: the Article is devoted to the problem of waste production during construction, operation and liquidation of coal mines of Russia. This work suggests that waste recycling technologies, including for reception of energy based on the modeling and system analysis of the biocenosis. The possibility of realization of innovative methods of processing plethodon using the biocenosis. Quite detailed questions transformation of industrial waste into energy through anaerobic bioconversion. As part of a description of the proposed methodology presents the results of field experiments and action program of recycling of materials at the stage of commercial operation. In particular it justifies the optimization of processing technology on the basis of the selection of the most active biocenosis of microorganisms. Theoretical developments are confirmed by practical data.

Keywords: disposal, technogenic resources, plothole, biotechnology, biotransformation, biocenosis, recycling

It is shown that one of the most important elements influencing the nature of development in the region is socio-ethno-cultural landscape. The study of its characteristics suggests a wide use of methods of social simulation. The purpose of modeling is to estimate the required parameters in conditions of uncertainty, both at the planning stage and during the current administration. Theoretical solutions to this challenge are based on the use of the principle of duality, when the production and analysis of missing information about a managed object, in our case about socio-ethno-cultural landscape, the system is in the process of governance. The duality of the models appears in their dual role as research (for monitoring characteristics of socio-ethno-cultural landscape and, at the same time as the reference models for the management of development in the region. Need of approbation and problem integration of methods of the system analysis, social diagnostics and social and mathematical modeling which will make new scientific methodology of research is shown. To solve the problem of this level is proposed for effective convergence of methodological knowledge in the use of total potential informational, cognitive, and socio-humanitarian technologies.

Keywords: dsimulation, dual simulation, socio-ethno-cultural landscape, managing the development of the region