The article discusses the possibilities of implementing the model of subject-language integrated learning in higher education institutions, and the authors focus on their professional experience in implementing this model in Southern Federal University for undergraduates. The authors managed to highlight in detail the working options of CLIL, taking into account the specifics of the modern labor market. The authors conclude that the presented technology can and should be applied in practice while observing the principle of feasibility in the perception of professional content in a foreign language by the target audience. This approach requires the teacher to be flexible in the development of such disciplines, since their subject content is adapted in accordance with the language level of the students.

Keywords: content and language integrated learning, social order, bilingual education, communicative approach, professionally-oriented content, didactic principles, professional

The paper considers a model of a multi-aperture wave-front sensor for an active laser beam control system based on the iterative image reconstruction algorithms with limitations, particularly, on the Gerchberg-Saxton algorithm. The specifics of these algorithms is the presence of the so-called divergence factor which is characterized by obtaining “successful” and “unsuccessful” solutions, and may be clarified by stagnation conditions available (or by local extrema). The use of global optimization methods allows to avoid this constraint and to build quite an effective strategy for retrieving phase information. An experimental research was conducted to restore phase information using this method. For this purpose, a model of a seven-channel laser system with a different phase shift was developed.

Keywords: multichannel laser systems, wavefront sensor, Gerchberg-Saxton algorithm, physical modeling, image reconstruction, phase retrieval

The thickness of the steel sheets used in the element was gradually increased to meet the load bearing capacity requirements of large span steel bridges. As the main method of joining heavy plate steel, welding results in significant residual welding stresses with a complex distribution. Large residual stress during welding will significantly affect the performance of steel bridges. In this work, the distribution of residual stress in a welded thick steel sheet is systematically investigated, a specimen with a thickness of 80 mm was designed and manufactured, and the residual stress of welding was measured by X-ray diffraction.

Keywords: steel bridge, thick steel plate, welding residual stresses, X-ray diffraction method, weld joint

This article discusses the technology of the Internet of things, which is used to connect smart objects to the network, for intelligent control of the power system and automation of household processes. Intelligent power system management aimed at ensuring a more uniform use of electricity and minimizing energy losses during transmission and consumption of electricity. This technology is currently being promoted globally by utilities, scientific organizations, and governments. In this work, also, a conceptual model of a smart home is built in the Cisco Packet Tracer virtual constructor and diagrams of device interaction at all levels of network construction are given.

Keywords: internet of Things, IoT, cybersecurity, automation, Cisco Packet Tracer

The article should choose a metal truss based on the initial data for pitched roofs. Defined maximum loads and deflections in each truss. On the analysis of the residually deformed state of the truss, it was concluded that the most authentic in terms of the structural members of the truss. Recommendations are given for the design of load-bearing structures of roofs on metal trusses in the manufacture of a shed roof structure.

Keywords: truss, effort, designing, deflection, roof, load, static calculation, displacements, trapezoidal truss, Molodechno truss

This article analyzes two systems of logistics for construction organizations based on the concept of Material Requirements Planning (MRP) and Just-in-Time (JIT). The main advantages and disadvantages of each system were investigated, and which of them are most effective in the current conditions were determined. Possible options for improving MTO systems are considered, as well as recommendations for the introduction of MRP and JIT into the practice of construction organizations to increase efficiency and reduce costs are proposed. The article will be useful for specialists in the field of construction and logistics, as well as for everyone who works in the field of management and optimization of business processes.

Keywords: logistics, Material Requirements Planning concept, Just-in-Time concept, construction project planning

The problem of computing symmetric Hadamard matrices of the Balonin-Siberry construction is considered. To obtain such matrices, a large number of random binary sequences are required to select three of them, which are bound by the requirements of the matrix design. Such sequences are the first rows of three cyclic blocks of Hadamard matrices. The background of the emergence of quantum computing and the advantage of quantum generation of binary sequences for subsequent selection are considered. The calculation of Hadamard matrices is proposed as a test problem for quantum computers, which allows to show quantum superiority.

Keywords: quantum computers, qubits, random number generators, orthogonal matrices, Mersenne matrices, Kronecker product

This article presents the results of a study of the process of decompaction of clay soils when they are used in soil structures. To study this issue, the following factors were chosen: the dimensions of the test samples, the amount of load on the samples, swelling when soils are moistened and shrinkage when they are dried, and the loss of strength of the samples during their decompaction was also estimated. All studies with soils were carried out in laboratory conditions. In the course of the research, dependences of relative decompaction on vertical load and changes in shear forces depending on the degree of moisture during decompaction of soils were obtained. The main conclusions of the work are given.

Keywords: clayey soil, decompaction of soils, mineralogical composition, optimal soil moisture content, density of the soil skeleton

The article contains statistics on the number of destroyed buildings as a result of emergencies that have occurred over the past twenty years. A table has been formed taking into account the factors of selection of the method of erecting buildings.

Keywords: earthquake, construction technology, factor, selection of construction method

The paper considers the operator model of the technological system for the production of caramel, assesses the stability of the subsystems and the content of the technological system. For a consistently stable caramel formation subsystem using the Shewhart map under specific production conditions, an analysis of the stability of the subsystem was carried out.

Keywords: operator model, subsystem, system integrity, process stability, control charts, average values, range

On the basis of the study, an analysis was made of the capacity of the roundabout according to the existing traffic intensity in the city, taking into account the composition of the traffic flow, the main factors affecting the passage of vehicles at the entrance to the self-regulated intersection are given. The possibilities of reducing congestion within the framework of the existing street and road network of the city are analyzed, conclusions and recommendations are given based on the results obtained.

Keywords: traffic capacity, traffic composition, roundabout, design speed, vehicle spacing, center island, load level, congestion, normalized traffic volume, number of lanes, service level

The relevance of forensic construction and technical expertise in the Russian Federation increases with the increase in the level of urbanization and at the same time the community of forensic construction experts with deep knowledge in the construction field obtained as a result of professional education is growing rapidly. The article raises the issues of lagging the level of preparedness of construction experts in procedural matters, in the skills of mastering the art of polemics, in the ability to flawlessly design the results of the examination in the form of an expert opinion. The authors of the article, based on the study of the practice of conducting judicial construction and technical examinations, analyzed the organizational and legal problems arising from the expert in connection with the violation of the principle of unity of form and content during the examination, underestimating the importance of putting evidence in a strict procedural form.

Keywords: construction and technical forensic examination, special knowledge, forensic expert, examination production, examination procedure

The article considers a probabilistic-temporal model for assessing the intelligence protection of a group of unmanned aerial vehicles for military purposes from enemy radio and radio intelligence complexes in service with the US Army, provides analytical expressions and a calculation sequence with examples.

Keywords: intelligence security, a group of unmanned aerial vehicles, the probability of temporary contact, the probability of energy detection, stealth, signal-to-noise ratio, surveillance reconnaissance zone, detailed reconnaissance zone, radio and radio intellig

The paper considers an example of solving a plane problem of the theory of plasticity as applied to concrete, which occurs when an absolutely rigid stamp acts on a concrete base. In this case, the solution was sought in the form of isolines of characteristics, the position of which made it possible to determine the stress state of the foundation. In this case, three areas were distinguished, differing in the stressed state. In the work, it was possible to analyze the effect of friction on the surface of the stamp on the boundaries of these regions and the isolines of stresses in them. Three conditions were considered: friction is absent, friction is constant, friction is proportional to the greater principal stress. The influence of various boundary conditions on the surface of the stamp on the stress state of the concrete base is revealed.

Keywords: concrete, theory of plasticity, plane problem, stress-strain state, stresses, friction, corner punch

The article discusses the development of an automated monitoring system for the lower position of the crusher cone KKD-1500/180-GWP of the processing plant of JSC Lebedinsky GOK based on a contactless inductive position sensor. The purpose of this system is to inform the technological personnel in a timely manner about the irregular lowering of the crusher cone to the lower level, followed by prompt measures to eliminate or repair the crusher hydraulic unit, as well as the constant maintenance of the crushing ore optimal mode with specified quality characteristics in size. The automated monitoring system for the lower position of the crusher cone will reduce the concentrating plant concentrate losses, increase production efficiency by reducing the electricity specific consumption, as well as improve the personnel working conditions.

Keywords: crushing of ferruginous quartzites, enrichment factory, cone crusher, granulometric composition of ore, automated system for monitoring the position of the cone crusher