Based on the results of engineering and geological survey of real construction sites in Rostov-on-Don and the Republic of Kalmykia, the dynamics of subsidence processes on laboratory samples of loess soil tested for compression according to the "one curve" scheme according to GOST 23161-2012 was studied.

Keywords: subsidence, compression compression, odometer, loess soil, subsidence pressure, surveys, geomechanics, soil mechanics

A method for increasing the production efficiency of ultra-lightweight refractory products is proposed, by optimizing the technology for preparing foam, which allows to release the products from the forms immediately after they are installed for drying. The plastic-viscous characteristics and stability of the foam can be increased by its mineralization, i.e. by introducing fine mineral substances into the foam-forming solution

Keywords: foam mass, mineralization, ultimate shear stress, plastic-viscous characteristics, ultra-light refractories, aluminum-potassium alum

the article describes a variant of setting sequential algorithms in the form of bipartite graphs by further defining them, which makes it possible to work with algorithms using graph theory methods in the future. Two forms of the task are considered: modular and functional-predicative. The possibility of setting the algorithm in table-predicate form is shown. It is concluded that in addition to the generally accepted methods of setting the algorithm, it can be set in matrix-predicate or table-predicate form, which allows using methods of matrix theory and methods of predicate theory when working with algorithms. setting the algorithm in matrix-predicate form avoids isomorphism when performing algebraic and set-theoretic operations on it.; setting algorithms in matrix-predicate form allows you to perform almost any operations on them

Keywords: graph-algorithm scheme, sequential algorithm, predicative block, functional block, pre-definition, bipartite graph, table-predicative form, graph theory, isomorphism

There is an analysis of the urban development location and the capacity of public spaces for cultural and educational purposes was carried out using the example of cultural centres for Volgograd. The normative and actual material security is determined separately for each administrative district and whole sity. There are suggestions on the advisability of erecting new cultural objects.Dynamics of modern cities is taking into account.

Keywords: planning, cultural centre, cultural and social structure, standard of material security, actual material security

The paper is based on a review of the scientific publications released from May through October 2019, the greater part of which, namely 14 papers, is included in the Web of Science scientometric database. The authors of the papers analyzed explore the construction industry problems over the past 5 years. The foreign studies listed in the reference section were based on the analysis of reviews falling in the above-mentioned timeline. The purpose of this paper is to identify the problems hindering the implementation of BIM technologies in the construction sector, not only in the foreign countries, but also in Russia.

Keywords: building information modeling, construction organizations, critical problems, external factors, absence of organizational support

The calculation algorithm is given and various options for solving the problem are considered when changing the parameters of the design scheme of the rod system on the example of a beam in the MS Excel software environment together with the MathCAD package. The proposed approach allows you to combine formulas, graphics, and calculation results on a single sheet, which is especially useful in the educational process. It contributes to a more conscious perception of the calculation process by students, allows them to implement various forms of distance learning in information technologies.

Keywords: the core of the system, algorithm, modelling, integration, information technology

The directions of modern research in the field of adaptive error correction, which can be applied when transmitting images in JPEG 2000 format over a noisy channel, are examined. Adaptive correction at the network level allows you to maintain a given percentage of packet delivery. Uneven protection at the application level is intended for use in broadcast broadcasts and allows the consumer to receive an image of various quality depending on the state of the network. Adaptive uniform protection at the application level is focused on point-to-point transmission and is aimed at receiving the maximum image quality by the receiver. The network layer tools discussed can be combined with the application layer tools.

Keywords: adaptation, noise-proof coding, forward error correction, noisy channel, JPEG 2000

The article considers the results of development of water treatment technology for household drinking water in Semey, presents a comparative analysis of widely used disinfectants, and considers technological schemes for water disinfection with chlorine dioxide and a combined disinfectant " chlorine dioxide and chlorine".

Keywords: household drinking water, disinfectants, chlorine

To date, the socio-economic situation in the country creates for the population quite significant obstacles in the implementation of tasks for the purchase of housing and other real estate through mortgage lending. However, when it comes to collecting the amounts owed on the loan, banks are faced with an analysis of the prospects for the sale of mortgaged property, as a result of which, in most cases, come to the conclusion that the original sale price of the mortgaged property with the realities of the market. In the article, the authors consider the judicial practice of determining the initial price of the mortgaged property and analyze the situation in which there is a need for judicial value examination, as well as give the main aspects of the methodology of this type of expertise. The purpose of the article is to form a clear idea of the reader about the process of resolving the dispute arising from the breach of obligations under the loan agreement.

Keywords: expert, forensic examination, subject of pledge, cost examination, assessment report, methodology

The construction of social infrastructure is an integral part of improving the quality of life. The study systematized the main problems faced by the developer and the state in the construction of social infrastructure, provides an approximate list of measures that can improve the situation.

Keywords: social infrastructure, state, developer, economy, residential complex, public-private sector, housing construction, state, operation

The mining industry, as well as the socio-economic development of this sector, makes a significant contribution to the development of the economy of some low-and middle-income countries rich in non-fuel minerals, as evidenced by the modified mining contribution Index (IVGP-BP). 10 of the 20 countries in which the mining industry contributes the most (the highest GPI-BP) rose one or two positions higher, according to the world Bank's country classification, between 1999 and 2019. Based on detailed data from the mining sector, such as mining, exports, prices, rents for mineral resources, mineral exploration expenditures, and state budget revenues, the current situation for 2019 is analyzed, as well as trends regarding the contribution to the development of the socio-economic level of the mining industry for 1999-2019.

Keywords: mining, minerals, industry, economy, export, mineral rent, gold, coal

The article deals with organizational and technological features of construction project management based on BIM-modeling. The methodological approach with the use of information modeling technologies, based on the account of time and resource constraints, which will improve the efficiency of construction project management, is proposed

Keywords: Organizational and technological features, construction projects, BIM-modeling, management, efficiency, planning, construction organization

Within approaching the plane-stress state the problem of a high-speed rotating disk being under side pressure is considered. Within the model of a perfect rigid-plastic body and the Mises yield criterion the values of external parameters for which the plastic zones appear have been defined. The stresses in plastic zones are obtained from the solution of the Cauchy problem, which includes two differential equations to define the stress tensor nonzero component. In order to estimate the stress state in the elastic zone the equivalent stress is introduced. The maximum allowable values of external parameters are obtained from the solution of the problem when the disk is in the limit state. The numerical results are represented as the stress vector hodograph.

Keywords: the plane-stress state, Mises yield criterion, the equivalent stress, an elasto-plastic solid, a rotating disk, a stress vector hodograph

This article is the result of a study of project documentation, one of the largest oil companies in the Russian Federation. This article aims to identify and identify systematic errors and deficiencies in the design of oil fields, which can lead to significant risks of accidents, damage to equipment, violation of the integrity of buildings, the emergence of threats to human life. The aim of the author was to identify and systematize these shortcomings, to offer the best options for correction for the purpose of further application, qualitative improvement and acceleration of the design of oil fields. Further examples of errors and shortcomings of project documentation, expected consequences which can occur if not to eliminate these errors and all necessary normative base on these questions will be given. Errors at the design stage, in turn, can lead to disastrous consequences, ranging from increased construction time, ending with emergencies and irreparable damage to the environment and human health, which leads to enormous economic losses. Design errors, even the most insignificant, can be compared with the butterfly effect. A minor mistake in the project can lead to grandiose consequences. Ballasting of pipelines. Ballasting of pipelines is taken into account in the installation of pipelines through water obstacles or water-bearing sections, when laying in the swamp.Depth of laying of pipelines at crossing of water barriers. The development of design solutions in the field of transitions on the materials of surveys that were carried out more than two years ago, without the implementation of actual engineering surveys is not allowed.Electrochemical protection of pipelines. At all available ways of laying, (except above-ground), irrespective of degree of aggressiveness of soil, pipelines shall be protected by complex anticorrosive substances and means of electrochemical protection are applied.The location of the purge of candles on the pipelines. The distance from a certain point to the purge plug in the construction of main pipelines from overhead wires must be taken from 300 meters, under cramped conditions of the route of high-voltage overhead lines, this distance can be reduced to 150 meters.the aim of the study was to identify design errors and their consequences, with the aim of further prevention and accounting. The result of these adjustments and corrections will be both cost savings and reduced construction time

Keywords: design, defects, field, capital construction, operation, analysis, research, documentation, expertise, violation

The paper focuses on energy efficient reconstruction of construction systems by means of their upward extension using modular spatial structures. It is further noted that the existing contradictory definition of the term “modular structures” necessitates classifying modular structural elements by spatial dimension, type and size, weight, degree of prefabrication, constructability and environmental safety. A list of the world’s leading manufacturers is provided featuring modular spatial structures to be used in the construction of new buildings and reconstruction of existing buildings. Also, the paper underlines the importance of using added stories in making modular roof structures of lightweight metallic structures (LMS) and lightweight thin-wall steel structures (LTSS) and provides an overview of the main types of modules, pointing out the key benefits of modular structures.

Keywords: modular building structures, energy efficient reconstruction, upward construction, structural and non-structural modules, constructability