The article describes the main problems of circuit simulation. The problem of solving ill-conditioned systems of linear algebraic equations (SLAE) of large dimension. The modified algorithm is a linear algebraic solutions. Described a hybrid evolutionary algorithm for solving linear systems based on the proposed modified method. The results of the pilot study and comparison of the algorithm with the algorithms based on the traditional methods for solving linear algebraic equation, which confirm the advantages of the hybrid evolutionary algorithm.

Keywords: Genetic operators, evolutionary algorithm, the system of linear algebraic equations, computer-aided design.

The article describes the methods of forming the program of technical and economic feasibility of reconstruction. The program is based on the technical and economic calculations which justify the need for its development. It is important to take into account the technical and economic indices which provide a minimal amount of construction works. During the development of technical and economic parameters, it is necessary to take into account the organization of construction, the terms of energy saving, heating, water supply, drainage and industrial waste water, human resources, the environment, the effectiveness of capital investments. All questions are considered for the perspective of the development of science and technology.

Keywords: site renovation, technical-and-economic indexes

  This paper is devoted to development of gas sensors air control. It is shown that copper oxides are the promising materials for high sensitive sensors. The CuOx film material was syntheses by means of citrate sol-gel technique. The sensors fabricated on the basis of CuOx film material were sensitive to ammonia gas in the range of 25-150 ppm. Working temperature was determined as 180 °C. Such sensors can be used for work area air control of industrial enterprises.

Keywords: gas-sensitive element, atmospheric air, sensors, copper oxides

  Results of researches of gas sensitive properties of zinc oxide films grown by reactive rf magnetron sputtering was shown. Process parameters, affected on the gas-sensitive ratio, response time, recovery time and the type of electrical conductivity of obtained films were identified. Optimal modes of magnetron sputtering of zinc oxide for implementing gas sensors (RF sputtering Zn target in a gas mixture of oxygen and argon at a concentration of 80% oxygen, a chamber pressure of 0.8 Pa and the magnetron power 100 W) were established. Avarage response time on NO2 gas was 5-15 sec.  The obtained values ​​of the gas-sensitivity were in the range 30-67% for NO2 concentrations from 20 to 100 ppm, CO and CO2 from 50 to 100 ppm and 81-97% for higher gas concentrations from 500 to 1000 ppm.  

Keywords: Nanotechnology, magnetron sputtering, zinc oxide, thin films, gas sensitivity

  Analytical dependence for determination of the key design data of the screw is received. Influence of quantity of recyclings of mixing of materials and mixing duration on these parameters is shown. Dependence of quality of a mix on quantity of cycles of mixing is established.  

Keywords: screw mixer, bulks, quantity of cycles, mixing duration, quality of a mix

  In this article the mathematical model dynamic process installations for blast cleaning the surface, and clearly showed the graph of the transition process, given the theoretical integer parameters yield in the specific process conditions.

Keywords: Fluid Technology, a dynamic characteristic of the drive, nozzle - gate, jetting processing surface

  Work is connected with the synthesis of information behavior of groups of autonomous intelligent agents of biomedical research, and machine learning methods to ensure the reliability of the forecast increase in their behavior using multi-agent systems based on the use of bionic principles, methods and models of swarm intelligence. Developed multi-agent system simulates the behavior of groups of autonomous intelligent agents developed methods to meet the proposed criteria of reliability, differing form the structure of the system and developed a set of specialized agents that provides the capability to model a group of biomedical robotics using autonomous intelligent agents. Classifier of stabilographic signals on the basis of Parzen method was developed. These data indicate that the auxiliary symptoms resulting from multidimensional scaling much more informative initial attributes.

Keywords: Intelligent agent, multidiagnostics, Parzen classifier

  The purpose of investigation is to examine the effect of adaptation to difficult-house physical stress on the regulation of the vertical posture of man. For the analysis of the ability to maintain a vertical position used stabilographic hardware-software complex "Stabilan-1-02" (JSK Rhythm ", Russia). The ability to maintain a vertical position was evaluated in two static positions: 1) the main stand (OS) in the presence and absence of visual information, and 2) dip (PP) in the presence of visual information. Revealed that an increase of physical performance ability to maintain balance in static positions, especially in the complicated conditions (deprivation of visual information and static muscle tension) increases.

Keywords: Sports stabilometry, adaptation, vertical pose

Submitted manufacturing operations performed at the landfill site TOP, their main types of negative impacts on the environment. The conditions of formation and emission of biogas generated in the interior of the landfill body and having a pronounced toxic effects. The dependence of the specific biogas yield for the period of his active stable generation.

Keywords: Solid waste consumption, landfill disposal TOP, biogas, wet waste, environmental safety

In article it is spoken about use of logistic approach at tariff setting on city passenger transport

Keywords: Logistic approach, tariff, tariff setting, passenger transportation, passenger transport

In article are considered questions of the study of the composition of the drip of ash from galvanic bath with the application of chromium coatings, the results of research concentrations of chromium above the surface of the bath and in the working zone depending on the height above the mirror electrolyte

Keywords: working zone, galvanic bath, drip ash, chrome, local capturing

Consideration of the formation method of choice underlying architecture of reconfigurable computing system minimal cost, providing the requirements for the probability of the task. The main mathematical tool used in the theory of decision making under uncertainty, as well as methods for game-theoretic optimization.

Keywords: reconfigurable computing system, Markov processes, game-theoretic optimization, basic architecture, the uncertainties

  This article presents an agent-based computational model of civil violence. In the model a central authority seeks to suppress communal violence between two warring ethnic groups. To describe model UML diagrams are presented. Article also shows a number of experiments with model which shows such benefits of model as guiding data collection, revealing dynamical analogies, discovering new questions and decision support in crisis situations.

Keywords: Legitimacy, agent based modeling, simulation, risk aversion, jail, neighborhood patches, radius vision, expressed political tension, latent political tension

The problems of the modification of voltage inverter circuit are considered and using of a DC power source in the realization of function of boosting voltage converter.

Keywords: Active rectifier, voltage converter, inverting converter, multi-channel power supply , the conversion factor.

The  researches results of possibility of  equations simplification of ring dynamic, which is based on two bearings with the help of task of special base functions system, in accordance with conditions of  zero transmissions in bearings points are represented. The calculation of the coefficients of the basis functions of a linear function and the polynomial of degree  two and three.

Keywords: ring based on two bearings, zero displacement at points bearings, system of basis functions