The problems of mm propagation: rain attenuation,  depolarization and gaseous absorption are considered, and the estimate of the energy potential of wireless mobile data transport networks is given. The dependence on the output power of the distance and the total losses, and the necessary signal levels for different types of modulation being shown.  The estimate of the interfering transmitters effect of side lobes of the antenna is given.  

Keywords: radio wave propagation, mm range, energy potential, rain clutter, side lobes, polar pattern

The paper examines the main approaches to the modeling of scientific and technical progress. Details the conditions and change the model postulates technological structure , its main provisions . Put tasks that are of great interest for scientists involved in the modeling of scientific and technological progress , and for economists who are interested in the practical application of these results . Values ​​of other well-known models of STP . The variants of modernization and the possible synthesis of these approaches to modeling change tehnologichekogo order.

Keywords: scientific and technological progress, advanced technology, changing technological way of practical experience, the elasticity of factor capital

Currently actively developing direction of seismic protection, the identified using absorbing screens made in the form of sandwich structures with упругопластическими energy-absorbing elements. In this article, on the basis of the conducted research and analysis, the formulas for the calculation of power characteristics of belt elastic element.

Keywords: Dynamic loading, uprugoplastichesky deformation, deformation chart, power absorption

To the Volgodon settlement-system has developed thematic maps of subsiding soils, indicating their capacity, groundwater levels, landslide and erosion hazards. Sources of information were the materials of the geological surveys, remote sensing of the Earth and local geological maps . Application of GIS-technologies and numerical geofiltration has significantly increased the quality of the results. On the basis of the results, has developed a comprehensive map of geological hazards.

Keywords: geological hazard, modeling, geofiltration, subsidence, landslides, erosion, underflooding, remote sensing

To the East Donbass agglomeration has developed thematic maps of subsiding soils, indicating their capacity, groundwater levels, surface subsidence above mining, landslide and erosion hazards. Sources of information were the materials of the geological surveys, maps and literature data, and numerical modeling. For the purposes of industrial and civil construction built the final map of the cumulative effects of geological hazards.

Keywords: geological hazard, modeling, geofiltration,subsidence, landslides, erosion, underflooding, agglomeration.

 A significant part of Rostov region and North Caucasus regions of the built-over territories according to its settlement consists of I and II type loess soil.
     The author develops a method for optimal parameters determination of the stabilized loess bases under the influence of different factors (loads, emergency steeping, ground waters level alteration etc.). Selection of optimality criteria depends on the applicable method of technical melioration. Determinative limitation is the calculation upon the II group of limit states. Application of non-linear mechanical and mathematical models for calculation of structural and unstable soils upon deformations is recommended.
     Silicification stabilizing of loess soils is almost impossible at the filtration coefficient of K<0.1 m/day.
     Characteristics of the fixed massive depend on soil moisture level, injection mode, density of sodium silicate solution, time of injection and volume of solution.
     Determinative conditions for the possibility of soils injection stabilizing with cement or other solutions are the following: geometric criterion (cement particles size and soil pores size, determined by the active openness), solution viscosity in relation to density, injection pressure, water-cement ratio, filtration coefficient. The most common pores in loess soils are active pores of 20 micron diameter, quantity of which comprises 20-50% of total soil openness. Solution-conductive (active openness) are the pores of more than 0.01 mm at size.
     Selection of stabilizing method depends on the form of the stabilized area.
     The author, basing on variation principles of mechanics of constructive and non-linear systems and theory of adaptive evolution of mechanical systems, developed determination method of rational form of the stabilized basal complex. Specific feature of the developed model is increasing of bearing capacity, stability and location of stabilizing area with more specific accuracy level within soil. To detect stress-deformed state in bases of buildings and constructions there are elaborated programs in APDL languages in the ANSYS software environment.  

Keywords: loess soil; method for optimal parameters determimation; form of the stabilized area;theory of adaptive evolution of mechanical systems; ANSYS software environment

The article is devoted to the scientific basis for the concept of safe principles of sustainable development in the process of urban planning and selection of investment and construction projects of development of urban territories. The author on the basis of the analysis of legislation and normative and legal basis discussed approaches to the characterization of the safe development of the urban environment, studied the principles of sustainable development-based approach to the application of the concept of acceptable and reasonable risk in the planning of urban development of urban territories, identifies areas and the boundaries of their realization.

Keywords: concept of security, urban planning, integrated development, urban territories, the risk of

In the article was discusses the problem of assessing the effectiveness of marketing research with the help of different methods; was done an attempt to identify the approaches to determining the effectiveness of marketing research based on their goals. Also was developed the formulas for quantitative evaluation of the effectiveness of marketing research.

Keywords: the efficiency of marketing research, assessment of marketing researches, economic efficiency of marketing research

Defined criteria for identification of defect parameters, on the basis of the analysis of the different modes of own fluctuations, with the use of finite element modal calculation console corpulent model of a rod with a single defect. Developed finite element model of a universal complex . Considered corpulent (3-d) model on the basis of 3D finite element Solid92. When solving the problem considered on 26 oscillation modes depending on the size of the defect and its location.

Keywords: Damaged, defective, swing, cantilever, frequency

Consensus problem involves a system of processes, some of which may be faulty. A fundamental problem of fault-tolerant distributed computing is for the reliable processes to reach a agreement on a same decision. One approach to achieving such agreement is for processes to vote and agree on the majority value. In the absence of faults, this works fine, but the vote even one faulty process can swing the outcome. In this paper we present some result of analysis of a mixed-failure model, where t processes may fail, b out of which is the Byzantine failures and remaining c is crash processes. In a asynchronous model of computation for several distributed problems it turns out that a collection of N processes can tolerate c crash failures if 2c < N, while robustness against b Byzantine failures requires 3b < N. Our algorithm rely on a weak definition of the Byzantine failures which disallows them act as a dead or a crash processes and can tolerate the 2(N – 2c)/3 failures.

Keywords: fault tolerance, distributed algorithms, asynchronous networks, byzantine failures

Solution for high-speed video transmission in hydroacoustic channel by amplitude modulation with orthogonal subcarriers is specified. Results of method experimental check are presented. Discussed method is doppler-tolerant and can be realized in many common DSPs.

Keywords: hydroacousitcs, video transmission, amplitude modulation

The paper considers system designed to help with the organization of qualification testing of expert groups, as well as in the provision of software tools for expert and automated clustering and classification of devices and equipment of railway automation. The scope of this complex are intelligent systems, devices, and other equipment in work with whom systematic classification of measurements needed. Presented software application designed on Borland Delphi - high level programming language.

Keywords: expert system, clustering, classification, acceptance testing, diagnostics of technical condition

This paper presents key capital structure determinants of construction companies and their impact on fund raising and financing mix formation in accordance with the conditions of construction activity. It was found that profitability and tangibility have a positive effect on leverage, risk - the negative and the effect of company size, assets growth rate and taxes is ambiguous.

Keywords: capital structure determinants, profitability, risk, taxes, tangibility, construction companies

The establishment of automated air monitoring systems is a promising way of the air monitoring devices development. The comparative analysis of literature has shown that thin films based on semiconductor metal oxides are effective and widely used material for air monitoring systems creation. In order to create effective and more sensitive sensors it is important to research processes that occur on the surface of the gas sensitive material when it contacts with different substances. The processes that proceed on the surface of gas sensitive material based on SiO2SnOxCuOy during the interaction with molecules of nitrogen dioxide. Quantum chemical calculations have shown that there are three possible mechanisms of interaction between the molecules of nitrogen dioxide with a surface of gas sensitive material.

Keywords: multitouch system of the monitoring, gas-sensitive material, molecules of dioxide of nitrogen

  This paper is devoted to development of gas sensors air control. It is shown that copper oxides are the promising materials for high sensitive sensors. The CuOx film material was syntheses by means of citrate sol-gel technique. The sensors fabricated on the basis of CuOx film material were sensitive to ammonia gas in the range of 25-150 ppm. Working temperature was determined as 180 °C. Such sensors can be used for work area air control of industrial enterprises.

Keywords: gas-sensitive element, atmospheric air, sensors, copper oxides