The developed version of the snow plow plow is created in order to improve the performance of a single unit of equipment when clearing snow on wide streets and to preserve unimpeded movement in a dense stream of cars, as well as the use of technology on narrow streets

Keywords: clearing, productivity, folding, trails, KAMAZ, transportation, costs, area, speed, snow

The physical and chemical properties of cobalt catalysts for the Fischer-Tropsch synthesis prepared by the method of impregnating a silicate carrier have been studied. The influence of oxide promoters on the specific surface, volume and pore sizes, the degree of reduction of metallic cobalt on the surface of Co-Al2O3 / SiO2 catalyst has been studied.

Keywords: Fischer-Tropsch synthesis, synthetic hydrocarbons, catalyst, cobalt, promoter, carrier, specific surface, porous structure, catalytic activity, degree of reduction

The parameters of the porous structure and the outer surface of cobalt catalysts for the Fischer-Tropsch synthesis prepared by the water-impregnation method were studied. The effect of the polymorphous modification of the support on the physico-chemical properties of the Co / Al2O3 catalyst was studied.

Keywords: Fischer-Tropsch synthesis, synthetic motor fuel, catalyst, carrier, promoter, polymorphic Al2O3 modifications, elemental analysis, specific surface, porous structure

The main problems of Russian transport infrastructure are considered. On the example of European experience the ways of solving these problems are proposed. The article also discusses in more detail the transport situation in the city of Rostov-on-don, what are the problems and how they can be solved in the near future.

Keywords: transport infrastructure, highways, Parking, concept, neighborhood, traffic flow, car, Parking, building, congestion, flow, disaster

Modern Russia is facing global challenges associated with the emergence and widespread use of new technologies, the transformation of traditional industries, the intensification of information flow, human resources and capital between individual sectors of the economy and countries. All this entails radical changes in the conditions of human life, development of the economy and society. Coupled with a variety of diverse objective circumstances - a complex geopolitical situation, a slowdown in economic growth, the transformation of consumer demand, structural imbalances in the economy, etc. - all this requires comprehension and formation of a long-term agenda in the sphere of science and technology, the corresponding complexity and complexity of the processes taking place.

Keywords: economy; socio-economic system; transformation; technologies; management; labor market; a new technological structure; robotics; innovation; human capital

The article is devoted to the conceptual issues of implementation of the main priorities of the decree Of the President of Russia dated may 7, 2018 № 204" on national goals and strategic objectives of the Russian Federation for the period up to 2024 " in the southern Federal district. This article presents the conceptual form of information and legal field, analysis, guidelines for the creation of interregional projects in each of the above areas, taking into account the specifics of socio-economic development of the regions of the South of Russia.

Keywords: The decree of the President of Russia from may 7, 2018 No. 204, South Federal district, the priority areas of socio-economic development, demographic development, health, education, urban environment, ecology, roads, employment, science

The article considers the experimental estimation of the heat transfer coefficient in a hybrid immersion cooling system with contact point cooling and dry zones. The change in the heat transfer coefficient is made through a change in the Reynolds number for the flow of the coolant in the immersion cooling system. The experimental investigation is carried out on the basis of a numerical simulation model of the process under study. As a result, the dependences of the thermal resistance of the processor-heat exchanger system on the heat transfer coefficient and on the Reynolds number of the turbulent flow were obtained, and the results with the simulation results were estimated. It is found that, with an increase in the Reynolds number, the heat transfer intensification is weaker than the theoretical one. The refinement coefficients for the case under consideration are found.

Keywords: processor, heat flow, thermal resistance, Laplace equation, turbulent flow, Reynolds number, heat transfer, immersion cooling system, immersion cooling system, cavitation

In this study, the task is to simulate the cooling system of supercomputers with a heat pump on the reverse Stirling cycle by numerical simulation of heat transfer processes in the object under study. The results of numerical simulation of heat transfer processes in the superheater processor cooling system with a heat pump on the reverse cycle are presented. A numerical model of the heat transfer process was investigated. As a result, the dependencies of the required thermal lift of the heat pump are obtained taking into account the thermal resistance of the system. The first liquid cooling circuit - the cold cylinder of the heat pump and the hot cylinder system - the second liquid cooling circuit, depending on the heat transfer coefficient of the heat pump.

Keywords: processor, heat flow, thermal resistance, Laplace equation, heat pump, heat exchange, Stirling backflow, cooling system

The article substantiates the expediency of classification of technical heat-saving methods in the operation of residential and public buildings. The results of the study of the physical nature, efficiency and rational application of these methods were used in the classification according to their main function. The proposed classification of heat-saving methods is recommended for use in the integrated assessment of heat efficiency of residential and public buildings, and in determination of sources of heat savings during their operation.

Keywords: Operation of buildings, heat-saving methods, enclosing structures, heating system, hot water supply, ventilation

The article deals with the stages, causes of origin and actual problems of high-rise construction in Rostov-on-Don. Examples of successful development of high-rise buildings in Russia and abroad are given. The problematic aspects are analyzed, possible ways of solving on the basis of the experience of other cities in the construction of unique buildings are shown.

Keywords: high-rise construction, town-planning, skyscraper, design, architecture, number of storeys, Rostov-on-Don, development, zoning, world practice, normative and legal documentation

We consider eccentrically compressed rod elements of reinforced concrete structures. Problems are solved for the development of methods for calculating the strength of normal sections in the case of eccentric compression of reinforced concrete elements; calculation of the load-carrying capacity of reinforced concrete structures by the example of columns of varying flexibility for ultimate effort. Analytically, a calculation is made, which makes it possible to determine the strength of reinforced concrete structures.

Keywords: внецентренно сжатые стержни, железобетонные конструкции, прочность, нормальные сечения, колонны различной гибкости, несущая способность, предельные усилия

In this study, the task of optimization of the hybrid system of immersion cooling processor supercomputer with resistance spot cooling and dry zones. by numerical simulation and experimental study of heat transfer processes in the test object. The article presents the results of numerical simulation and experimental study of heat transfer in a heat exchanger submerged cooling system processors. We investigated the numerical model of heat transfer process in the processor-heat exchanger system. As a result, obtained according to the thermal resistance of the system processor and the heat exchanger of the heat transfer coefficient and the number of turbulent flow Reynolds.

Keywords: processor, heat flow, thermal resistance, Laplace equation, turbulent flow, the Reynolds number, heat, immersion cooling, immersion cooling system

In this study, the task of optimizing the supercomputer CPU cooling system with a heat pump in the reverse Stirling cycle through numerical modeling of heat transfer processes in the test object The article presents numerical modeling of heat transfer processes in the cooling system of the supercomputer processors with a heat pump on the return cycle. We investigated the numerical model of heat transfer process in the system of CPU "cold" cylinder and heat pump system "hot cylinder" - coolant. As a result, obtained according to the thermal resistance of the system of CPU "cold" cylinder and heat pump system "hot cylinder" - coolant depending on the coefficient of heat transfer and on the value of COP of the heat pump

Keywords: processor, heat flow, the thermal resistance of the Laplace equation, heat pump, heat exchange, reverse Stirling cycle cooling system

Discusses the construction of the supporting ring beams steel bins on separate supports. The problem for the development of algorithm and program of calculation of the reference ring beams, steel silos, the combined effect of bending and torsion. Analytically developed a calculation program that allows for the analysis work on the combined effect of bending and torsion when the geometric parameters of the cross section.

Keywords: basic ring beam for steel silos at certain poles, steel silos, bending, torsion, geometric parameters of the cross section, normal tension, torsion torque, bimoment

The article substantiates the necessity to address the effects of fog and rain when designing mobile robotic platforms and to define the fog numerical indicators and conditions of its occurrence. The common braking system structure and the working principle of brake disk drying through periodic rubbing of brake pads and disks are brought. The electrical diagram of brake control system with microcontroller and the fog and rain sensors and reliability analysis of this device are given. In a proposed control device operation algorithm the conditions of fog occurrence and the sensor parameters are considered. The algorithm is required to create a software system for mobile robotic platform.

Keywords: mobile robotic platform, fog, braking system, microcontroller, sensors, control system, software system